[MASOCH-L] Ajuda com Storage IBM x Linux

[Allan Rodrigo de Lima]

Então tá facil, depois que vc configurar as lun e apresentar para o 
servidor, tem um software (script) qua a qlogic disponibiliza no site 
para scanear as luns "on the fly". O que a gente usa aqui chama-se 
ql-dynamic-tgt-lun-disc.sh

Dá uma procurada nisso...

Divirta-se,
Allan

..:: S.e.r.i.a.l ::.. wrote:
> Ola Allan
> 
> O Linux reconheceu sim, segue o resultado do comando dmesg |grep qla:
> 
> [root at servidor]# dmesg |grep qla
> qla2400 0000:0f:04.0: Found an ISP2422, irq 225, iobase 0xf881c000
> qla2400 0000:0f:04.0: Configuring PCI space...
> qla2400 0000:0f:04.0: Configure NVRAM parameters...
> qla2400 0000:0f:04.0: Verifying loaded RISC code...
> qla2400 0000:0f:04.0: Allocated (1061 KB) for firmware dump...
> qla2400 0000:0f:04.0: Waiting for LIP to complete...
> qla2400 0000:0f:04.0: LIP reset occured (f700).
> qla2400 0000:0f:04.0: LIP occured (f700).
> qla2400 0000:0f:04.0: LIP reset occured (f7f7).
> qla2400 0000:0f:04.0: LOOP UP detected (4 Gbps).
> qla2400 0000:0f:04.0: Topology - (F_Port), Host Loop address 0x0
> scsi3 : qla2xxx
> qla2400 0000:0f:04.0:
> qla2400 0000:0f:04.0: scsi(3:0:0:0): Enabled tagged queuing, queue depth 32.
> qla2400 0000:0f:04.0: scsi(3:0:0:31): Enabled tagged queuing, queue depth
> 32.
> qla2400 0000:0f:04.0: scsi(3:0:1:0): Enabled tagged queuing, queue depth 32.
> qla2400 0000:0f:04.0: scsi(3:0:1:1): Enabled tagged queuing, queue depth 32.
> qla2400 0000:0f:04.1: Found an ISP2422, irq 233, iobase 0xf881e000
> qla2400 0000:0f:04.1: Configuring PCI space...
> qla2400 0000:0f:04.1: Configure NVRAM parameters...
> qla2400 0000:0f:04.1: Verifying loaded RISC code...
> qla2400 0000:0f:04.1: Allocated (1061 KB) for firmware dump...
> qla2400 0000:0f:04.1: Waiting for LIP to complete...
> qla2400 0000:0f:04.1: LIP reset occured (f700).
> qla2400 0000:0f:04.1: LIP occured (f700).
> qla2400 0000:0f:04.1: LIP reset occured (f7f7).
> qla2400 0000:0f:04.1: LOOP UP detected (4 Gbps).
> qla2400 0000:0f:04.1: Topology - (F_Port), Host Loop address 0x0
> scsi4 : qla2xxx
> qla2400 0000:0f:04.1:
> qla2400 0000:0f:04.1: scsi(4:0:0:0): Enabled tagged queuing, queue depth 32.
> qla2400 0000:0f:04.1: scsi(4:0:0:31): Enabled tagged queuing, queue depth
> 32.
> 
> E também o comando lspci:
> 
> 0f:04.0 Fibre Channel: QLogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X
> HBA (rev 02)
> 0f:04.1 Fibre Channel: QLogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X
> HBA (rev 02)
> 
> E os módulos, no lsmod:
> 
> qla2xxx               171877  1 qla2400
> scsi_transport_fc      12353  1 qla2xxx
> sd_mod                 20545  3
> scsi_mod              120269  7
> sg,st,libata,aacraid,qla2xxx,scsi_transport_fc,sd_mod
> 
> 
> Qual programa é esse? Sabe como devo proceder?
> 
> Obrigado
> 
> 
> [.]'s
> Serial
> 
> 
> 
> -----Original Message-----
> From: masoch-l-bounces at eng.registro.br
> [mailto:masoch-l-bounces at eng.registro.br] On Behalf Of Allan Rodrigo de Lima
> Sent: quarta-feira, 19 de março de 2008 13:59
> To: Mail Aid and Succor, On-line Comfort and Help
> Subject: Re: [MASOCH-L] Ajuda com Storage IBM x Linux
> 
> Qual o modelo da hba?
> 
> no site da qlogic tem alguns softwares para fazer o "discovery"das luns 
> e etc...
> 
> Mas perguntinha básica: seu sistema reconhece sua hba?
> 
> ..:: S.e.r.i.a.l ::.. wrote:
>> Boa tarde amigos,
>>
>>  
>>
>> Estou precisando configurar discos de um storage IBM DS4700 em um Linux
>> Redhat 4 ES atraves de uma fiber channel Qlogic.
>>
>>  
>>
>> Alguem poderia me dar um auxilio, como devo prosseguir ou algum tutorial
> com
>> explica isso?
>>
>>  
>>
>>  
>>
>> Obrigado
>>
>>  
>>
>>  
>>
>> [.]'s
>>
>> Serial <mailto:skroot at gmail.com?subject=Contato> 
>>
>>  
>>
>>  
>>
>> __
>> masoch-l list
>> https://eng.registro.br/mailman/listinfo/masoch-l
>>
>>
>>
>>
> __
> masoch-l list
> https://eng.registro.br/mailman/listinfo/masoch-l
> 
> __
> masoch-l list
> https://eng.registro.br/mailman/listinfo/masoch-l
> 
> 
> 
>