[MASOCH-L] Ajuda com Storage IBM x Linux

[..:: S.e.r.i.a.l ::..]

Ola Allan

O Linux reconheceu sim, segue o resultado do comando dmesg |grep qla:

[root at servidor]# dmesg |grep qla
qla2400 0000:0f:04.0: Found an ISP2422, irq 225, iobase 0xf881c000
qla2400 0000:0f:04.0: Configuring PCI space...
qla2400 0000:0f:04.0: Configure NVRAM parameters...
qla2400 0000:0f:04.0: Verifying loaded RISC code...
qla2400 0000:0f:04.0: Allocated (1061 KB) for firmware dump...
qla2400 0000:0f:04.0: Waiting for LIP to complete...
qla2400 0000:0f:04.0: LIP reset occured (f700).
qla2400 0000:0f:04.0: LIP occured (f700).
qla2400 0000:0f:04.0: LIP reset occured (f7f7).
qla2400 0000:0f:04.0: LOOP UP detected (4 Gbps).
qla2400 0000:0f:04.0: Topology - (F_Port), Host Loop address 0x0
scsi3 : qla2xxx
qla2400 0000:0f:04.0:
qla2400 0000:0f:04.0: scsi(3:0:0:0): Enabled tagged queuing, queue depth 32.
qla2400 0000:0f:04.0: scsi(3:0:0:31): Enabled tagged queuing, queue depth
32.
qla2400 0000:0f:04.0: scsi(3:0:1:0): Enabled tagged queuing, queue depth 32.
qla2400 0000:0f:04.0: scsi(3:0:1:1): Enabled tagged queuing, queue depth 32.
qla2400 0000:0f:04.1: Found an ISP2422, irq 233, iobase 0xf881e000
qla2400 0000:0f:04.1: Configuring PCI space...
qla2400 0000:0f:04.1: Configure NVRAM parameters...
qla2400 0000:0f:04.1: Verifying loaded RISC code...
qla2400 0000:0f:04.1: Allocated (1061 KB) for firmware dump...
qla2400 0000:0f:04.1: Waiting for LIP to complete...
qla2400 0000:0f:04.1: LIP reset occured (f700).
qla2400 0000:0f:04.1: LIP occured (f700).
qla2400 0000:0f:04.1: LIP reset occured (f7f7).
qla2400 0000:0f:04.1: LOOP UP detected (4 Gbps).
qla2400 0000:0f:04.1: Topology - (F_Port), Host Loop address 0x0
scsi4 : qla2xxx
qla2400 0000:0f:04.1:
qla2400 0000:0f:04.1: scsi(4:0:0:0): Enabled tagged queuing, queue depth 32.
qla2400 0000:0f:04.1: scsi(4:0:0:31): Enabled tagged queuing, queue depth
32.

E também o comando lspci:

0f:04.0 Fibre Channel: QLogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X
HBA (rev 02)
0f:04.1 Fibre Channel: QLogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X
HBA (rev 02)

E os módulos, no lsmod:

qla2xxx               171877  1 qla2400
scsi_transport_fc      12353  1 qla2xxx
sd_mod                 20545  3
scsi_mod              120269  7
sg,st,libata,aacraid,qla2xxx,scsi_transport_fc,sd_mod


Qual programa é esse? Sabe como devo proceder?

Obrigado


[.]'s
Serial



-----Original Message-----
From: masoch-l-bounces at eng.registro.br
[mailto:masoch-l-bounces at eng.registro.br] On Behalf Of Allan Rodrigo de Lima
Sent: quarta-feira, 19 de março de 2008 13:59
To: Mail Aid and Succor, On-line Comfort and Help
Subject: Re: [MASOCH-L] Ajuda com Storage IBM x Linux

Qual o modelo da hba?

no site da qlogic tem alguns softwares para fazer o "discovery"das luns 
e etc...

Mas perguntinha básica: seu sistema reconhece sua hba?

..:: S.e.r.i.a.l ::.. wrote:
> Boa tarde amigos,
> 
>  
> 
> Estou precisando configurar discos de um storage IBM DS4700 em um Linux
> Redhat 4 ES atraves de uma fiber channel Qlogic.
> 
>  
> 
> Alguem poderia me dar um auxilio, como devo prosseguir ou algum tutorial
com
> explica isso?
> 
>  
> 
>  
> 
> Obrigado
> 
>  
> 
>  
> 
> [.]'s
> 
> Serial <mailto:skroot at gmail.com?subject=Contato> 
> 
>  
> 
>  
> 
> __
> masoch-l list
> https://eng.registro.br/mailman/listinfo/masoch-l
> 
> 
> 
> 
__
masoch-l list
https://eng.registro.br/mailman/listinfo/masoch-l