[GTER] Problema na ativação Frame-Relay Telefonica
Ilicilho Netto
ilicilho at gmail.com
Mon Mar 2 16:33:27 -03 2009
Caros
Novamente a telefonica me deixou na mão com um frame-relay
Problema igual o que passei anteriormente.
Configuro a interface, fica UP, porem, nao consigo dar ping no
next-hop(router da telefonica.
Segue abaixo o show-run e o show interface para quem puder me dar uma ajuda
interface Serial0/1/0
description -------------- REDE TELEFONICA -----------
no ip address
encapsulation frame-relay
frame-relay lmi-type q933a
interface Serial0/1/0.241 point-to-point
ip address 201.xx.xx.10 255.255.255.252
frame-relay interface-dlci 111
load-interval 30
Serial0/1/0 is up, line protocol is up
Hardware is GT96K Serial
Description: -------------- REDE TELEFONICA -----------
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec)
CRC checking enabled
LMI enq sent 643, LMI stat recvd 33, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 0 LMI type is CCITT frame relay DTE segmentation inactive
FR SVC disabled, LAPF state down
Broadcast queue 0/64, broadcasts sent/dropped 306/0, interface broadcasts
0
Last input 00:00:08, output 00:00:08, output hang never
Last clearing of "show interface" counters 05:10:18
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
495 packets input, 64621 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throt
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
343 packets output, 12245 bytes, 0 underruns
0 output errors, 0 collisions, 6 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Serial0/1/0.241 is up, line protocol is up
Hardware is GT96K Serial
Internet address is 201.xx.xx.10/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY
CRC checking enabled
Last clearing of "show interface" counters never
More information about the gter
mailing list