[GTER] Experiência placas OCE11102

Renan Menezes renanitmanager at gmail.com
Fri Feb 21 17:40:04 -03 2020 

Verifica se há também o arquivo:
/etc/modprobe.d/sfp.conf e caso afirmativo verificar sintaxe.

Se quiser me chama no telegram
+55(63)98492-8040

Em sex., 21 de fev. de 2020 às 17:38, Renan Menezes <
renanitmanager at gmail.com> escreveu:

> Padrão do Driver da Intel, mas posso estar enganado.
>
> Usa o dmesg para ver a crítica que ele faz para não subir a Interface. Sem
> os parâmetros, só o | more mesmo, as vezes alguns erros ficam ocultos com o
> -TH.
>
> O GBIC já está conectado no Switch?
>
> Qual o módulo GBIC que estás usando?
>
> Em sex., 21 de fev. de 2020 às 17:24, Lucas Willian Bocchi <
> lucas.bocchi at gmail.com> escreveu:
>
>> Mas esse é o driver padrão do kernel? Ou essas opções são pro driver da
>> intel mesmo? Os padrões não teve efeito algum.
>>
>> Em sex., 21 de fev. de 2020 às 13:23, Renan Menezes <
>> renanitmanager at gmail.com> escreveu:
>>
>> > Encontrei aqui:
>> >
>> > No /boot/loader.conf.local coloque:
>> > hw.ixgbe.unsupported_sfp=1,1
>> >
>> > No /etc/modprobe.d/ixgbe.conf coloque:
>> > options ixgbe allow_unsupported_sfp=1,1
>> >
>> > Em sex., 21 de fev. de 2020 às 13:04, Renan Menezes <
>> > renanitmanager at gmail.com> escreveu:
>> >
>> > > No freebsd você pode usar a configuração nos arquivos do Módulo.
>> > >
>> > > O pulo do gato e que no SFP você deverá colocar se tiver 2 sfp na
>> Placa
>> > ou
>> > > Duas placas com 1 SFP você no mesmo arquivo
>> > >
>> > > modprobe ixgbe allow_unsupported_sfp=1,1
>> > >
>> > > ou
>> > >
>> > > Com a linha:
>> > >
>> > > /boot/loader.conf
>> > > hw.ixgbe.unsupported_sfp=1,1
>> > >
>> > > Se você tiver duas placas com dois SFP
>> > >
>> > >   hw.ixgbe.unsupported_sfp=1,1,1,1
>> > >
>> > > Bem estranho, mas foi assim que funcionou comigo.
>> > >
>> > > Em algumas versões será no arquivo de configuração do Módulo a
>> sintaxe é
>> > a
>> > > mesma.
>> > >
>> > >
>> > > Em sex, 21 de fev de 2020 09:27, Lucas Willian Bocchi <
>> > > lucas.bocchi at gmail.com> escreveu:
>> > >
>> > >> Nuno
>> > >> Exemplo quentinho do forno
>> > >>
>> > >> root at srvLucas:~# rmmod ixgbe
>> > >> root at srvLucas:~# modprobe ixgbe allow_unsupported_sfp=1
>> > >> root at srvLucas:~# dmesg -TH
>> > >> [fev21 09:25] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
>> > >> version 5.1.0-k
>> > >> [  +0,000004] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
>> > >> [  +0,022390] ixgbe 0000:05:00.0: failed to load because an
>> unsupported
>> > >> SFP+ or QSFP module type was detected.
>> > >> [  +0,000003] ixgbe 0000:05:00.0: Reload the driver after installing
>> a
>> > >> supported module.
>> > >> [  +1,136444] ixgbe 0000:05:00.1: Multiqueue Enabled: Rx Queue count
>> =
>> > 8,
>> > >> Tx Queue count = 8 XDP Queue count = 0
>> > >> [  +0,000287] ixgbe 0000:05:00.1: 32.000 Gb/s available PCIe
>> bandwidth
>> > (5
>> > >> GT/s x8 link)
>> > >> [  +0,000122] ixgbe 0000:05:00.1: MAC: 2, PHY: 1, PBA No: Unknown
>> > >> [  +0,000001] ixgbe 0000:05:00.1: 00:1b:21:c0:2b:3e
>> > >> [  +0,000925] ixgbe 0000:05:00.1: Intel(R) 10 Gigabit Network
>> Connection
>> > >> [  +0,000020] libphy: ixgbe-mdio: probed
>> > >> [  +0,000283] ixgbe 0000:05:00.1 enp5s0f1: renamed from eth0
>> > >> [  +0,284290] ixgbe 0000:11:00.0: Multiqueue Enabled: Rx Queue count
>> =
>> > 8,
>> > >> Tx Queue count = 8 XDP Queue count = 0
>> > >> [  +0,084721] ixgbe 0000:11:00.0: 16.000 Gb/s available PCIe
>> bandwidth,
>> > >> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s
>> with 5
>> > >> GT/s x8 link)
>> > >> [  +0,096802] ixgbe 0000:11:00.0: MAC: 3, PHY: 0, PBA No: G45270-003
>> > >> [  +0,000005] ixgbe 0000:11:00.0: a0:36:9f:21:09:94
>> > >> [  +0,135326] ixgbe 0000:11:00.0 enp17s0f0: renamed from eth0
>> > >> [  +0,013640] ixgbe 0000:11:00.0: Intel(R) 10 Gigabit Network
>> Connection
>> > >> [  +0,000034] libphy: ixgbe-mdio: probed
>> > >> [  +0,285534] ixgbe 0000:11:00.1: Multiqueue Enabled: Rx Queue count
>> =
>> > 8,
>> > >> Tx Queue count = 8 XDP Queue count = 0
>> > >> [  +0,084750] ixgbe 0000:11:00.1: 16.000 Gb/s available PCIe
>> bandwidth,
>> > >> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s
>> with 5
>> > >> GT/s x8 link)
>> > >> [  +0,096847] ixgbe 0000:11:00.1: MAC: 3, PHY: 0, PBA No: G45270-003
>> > >> [  +0,000005] ixgbe 0000:11:00.1: a0:36:9f:21:09:96
>> > >> [  +0,135471] ixgbe 0000:11:00.1 enp17s0f1: renamed from eth0
>> > >> [  +0,012827] ixgbe 0000:11:00.1: Intel(R) 10 Gigabit Network
>> Connection
>> > >> [  +0,000028] libphy: ixgbe-mdio: probed
>> > >> [fev21 09:25] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
>> > >> version 5.1.0-k
>> > >> [  +0,000004] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
>> > >> [  +0,022390] ixgbe 0000:05:00.0: failed to load because an
>> unsupported
>> > >> SFP+ or QSFP module type was detected.
>> > >> [  +0,000003] ixgbe 0000:05:00.0: Reload the driver after installing
>> a
>> > >> supported module.
>> > >> [  +1,136444] ixgbe 0000:05:00.1: Multiqueue Enabled: Rx Queue count
>> =
>> > 8,
>> > >> Tx Queue count = 8 XDP Queue count = 0
>> > >> [  +0,000287] ixgbe 0000:05:00.1: 32.000 Gb/s available PCIe
>> bandwidth
>> > (5
>> > >> GT/s x8 link)
>> > >> [  +0,000122] ixgbe 0000:05:00.1: MAC: 2, PHY: 1, PBA No: Unknown
>> > >> [  +0,000001] ixgbe 0000:05:00.1: 00:1b:21:c0:2b:3e
>> > >> [  +0,000925] ixgbe 0000:05:00.1: Intel(R) 10 Gigabit Network
>> Connection
>> > >> [  +0,000020] libphy: ixgbe-mdio: probed
>> > >> [  +0,000283] ixgbe 0000:05:00.1 enp5s0f1: renamed from eth0
>> > >> [  +0,284290] ixgbe 0000:11:00.0: Multiqueue Enabled: Rx Queue count
>> =
>> > 8,
>> > >> Tx Queue count = 8 XDP Queue count = 0
>> > >> [  +0,084721] ixgbe 0000:11:00.0: 16.000 Gb/s available PCIe
>> bandwidth,
>> > >> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s
>> with 5
>> > >> GT/s x8 link)
>> > >> [  +0,096802] ixgbe 0000:11:00.0: MAC: 3, PHY: 0, PBA No: G45270-003
>> > >> [  +0,000005] ixgbe 0000:11:00.0: a0:36:9f:21:09:94
>> > >> [  +0,135326] ixgbe 0000:11:00.0 enp17s0f0: renamed from eth0
>> > >> [  +0,013640] ixgbe 0000:11:00.0: Intel(R) 10 Gigabit Network
>> Connection
>> > >> [  +0,000034] libphy: ixgbe-mdio: probed
>> > >> [  +0,285534] ixgbe 0000:11:00.1: Multiqueue Enabled: Rx Queue count
>> =
>> > 8,
>> > >> Tx Queue count = 8 XDP Queue count = 0
>> > >> [  +0,084750] ixgbe 0000:11:00.1: 16.000 Gb/s available PCIe
>> bandwidth,
>> > >> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s
>> with 5
>> > >> GT/s x8 link)
>> > >> [  +0,096847] ixgbe 0000:11:00.1: MAC: 3, PHY: 0, PBA No: G45270-003
>> > >> [  +0,000005] ixgbe 0000:11:00.1: a0:36:9f:21:09:96
>> > >> [  +0,135471] ixgbe 0000:11:00.1 enp17s0f1: renamed from eth0
>> > >> [  +0,012827] ixgbe 0000:11:00.1: Intel(R) 10 Gigabit Network
>> Connection
>> > >> [  +0,000028] libphy: ixgbe-mdio: probed
>> > >>
>> > >>
>> > >> Em sex., 21 de fev. de 2020 às 09:07, Nuno Vieira <nuno at hashpower.pt
>> >
>> > >> escreveu:
>> > >>
>> > >> > Em linux nunca tive problemas.  Não uso freebsd, nao faço ideia de
>> > como
>> > >> > resolver, mas certamente que haverá solucao.
>> > >> >
>> > >> > Nuno Vieira
>> > >> >
>> > >> > # hashpower - datacenter and it services
>> > >> > Leiria | Portugal
>> > >> >
>> > >> > p: +351308814400
>> > >> > e: nuno at hashpower.pt
>> > >> > w: https://hashpower.pt
>> > >> >
>> > >> > ----- Original Message -----
>> > >> > > From: "Lucas Willian Bocchi" <lucas.bocchi at gmail.com>
>> > >> > > To: "Grupo de Trabalho de Engenharia e Operacao de Redes" <
>> > >> > gter at eng.registro.br>
>> > >> > > Sent: Friday, 21 February, 2020 12:02:25
>> > >> > > Subject: Re: [GTER] Experiência placas OCE11102
>> > >> >
>> > >> > > Ih nuno.
>> > >> > > Se eu te contar quantas vezes já me incomodei com isso aí.
>> > >> Simplesmente
>> > >> > não
>> > >> > > funciona direito. Pro Freebsd não vai, pro Linux vai dependendo
>> da
>> > >> versão
>> > >> > > do kernel. Confiar nisso aí é igual mega-sena.
>> > >> > >
>> > >> > > Em sex., 21 de fev. de 2020 às 08:51, Nuno Vieira <
>> > nuno at hashpower.pt>
>> > >> > > escreveu:
>> > >> > >
>> > >> > >> Boas,
>> > >> > >>
>> > >> > >> Nunca tive problemas com os oticos da FS, Edgeoptic e da
>> Flexoptix
>> > >> > >>
>> > >> > >> De qualquer forma, ve se isto aqui não te ajuda a resolver:
>> > >> > >>
>> > >> > >>
>> > >> > >>
>> > >> >
>> > >>
>> >
>> https://route1.ph/2019/09/27/stretch-ixgbe-driver-allow-unsupported-sfp-modules-on-intel-x520-cards/
>> > >> > >>
>> > >> > >> regards,
>> > >> > >>
>> > >> > >> Nuno Vieira
>> > >> > >>
>> > >> > >> # hashpower - datacenter and it services
>> > >> > >> Leiria | Portugal
>> > >> > >>
>> > >> > >> p: +351308814400
>> > >> > >> e: nuno at hashpower.pt
>> > >> > >> w: https://hashpower.pt
>> > >> > >>
>> > >> > >> ----- Original Message -----
>> > >> > >> > From: "Lucas Willian Bocchi" <lucas.bocchi at gmail.com>
>> > >> > >> > Cc: "Grupo de Trabalho de Engenharia e Operacao de Redes" <
>> > >> > >> gter at eng.registro.br>
>> > >> > >> > Sent: Friday, 21 February, 2020 10:50:29
>> > >> > >> > Subject: Re: [GTER] Experiência placas OCE11102
>> > >> > >>
>> > >> > >> > Alguém já conseguiu colocar um gbic monomodo numa Intel
>> 82599ES
>> > >> dual?
>> > >> > Se
>> > >> > >> > sim poderia dizer qual a marca e o modelo?
>> > >> > >> > Essas placas são boas, porém essa chatisse de não suportar
>> > qualquer
>> > >> > SFP é
>> > >> > >> > um pé no saco.
>> > >> > >> > --
>> > >> > >> > gter list    https://eng.registro.br/mailman/listinfo/gter
>> > >> > >> --
>> > >> > >> gter list    https://eng.registro.br/mailman/listinfo/gter
>> > >> > >>
>> > >> > > --
>> > >> > > gter list    https://eng.registro.br/mailman/listinfo/gter
>> > >> > --
>> > >> > gter list    https://eng.registro.br/mailman/listinfo/gter
>> > >> >
>> > >> --
>> > >> gter list    https://eng.registro.br/mailman/listinfo/gter
>> > >>
>> > >
>> > --
>> > gter list    https://eng.registro.br/mailman/listinfo/gter
>> >
>> --
>> gter list    https://eng.registro.br/mailman/listinfo/gter
>>
>

More information about the gter mailing list