[GTER] Experiência placas OCE11102
Renan Menezes
renanitmanager at gmail.com
Fri Feb 21 17:38:19 -03 2020
Padrão do Driver da Intel, mas posso estar enganado.
Usa o dmesg para ver a crítica que ele faz para não subir a Interface. Sem
os parâmetros, só o | more mesmo, as vezes alguns erros ficam ocultos com o
-TH.
O GBIC já está conectado no Switch?
Qual o módulo GBIC que estás usando?
Em sex., 21 de fev. de 2020 às 17:24, Lucas Willian Bocchi <
lucas.bocchi at gmail.com> escreveu:
> Mas esse é o driver padrão do kernel? Ou essas opções são pro driver da
> intel mesmo? Os padrões não teve efeito algum.
>
> Em sex., 21 de fev. de 2020 às 13:23, Renan Menezes <
> renanitmanager at gmail.com> escreveu:
>
> > Encontrei aqui:
> >
> > No /boot/loader.conf.local coloque:
> > hw.ixgbe.unsupported_sfp=1,1
> >
> > No /etc/modprobe.d/ixgbe.conf coloque:
> > options ixgbe allow_unsupported_sfp=1,1
> >
> > Em sex., 21 de fev. de 2020 às 13:04, Renan Menezes <
> > renanitmanager at gmail.com> escreveu:
> >
> > > No freebsd você pode usar a configuração nos arquivos do Módulo.
> > >
> > > O pulo do gato e que no SFP você deverá colocar se tiver 2 sfp na Placa
> > ou
> > > Duas placas com 1 SFP você no mesmo arquivo
> > >
> > > modprobe ixgbe allow_unsupported_sfp=1,1
> > >
> > > ou
> > >
> > > Com a linha:
> > >
> > > /boot/loader.conf
> > > hw.ixgbe.unsupported_sfp=1,1
> > >
> > > Se você tiver duas placas com dois SFP
> > >
> > > hw.ixgbe.unsupported_sfp=1,1,1,1
> > >
> > > Bem estranho, mas foi assim que funcionou comigo.
> > >
> > > Em algumas versões será no arquivo de configuração do Módulo a sintaxe
> é
> > a
> > > mesma.
> > >
> > >
> > > Em sex, 21 de fev de 2020 09:27, Lucas Willian Bocchi <
> > > lucas.bocchi at gmail.com> escreveu:
> > >
> > >> Nuno
> > >> Exemplo quentinho do forno
> > >>
> > >> root at srvLucas:~# rmmod ixgbe
> > >> root at srvLucas:~# modprobe ixgbe allow_unsupported_sfp=1
> > >> root at srvLucas:~# dmesg -TH
> > >> [fev21 09:25] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
> > >> version 5.1.0-k
> > >> [ +0,000004] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
> > >> [ +0,022390] ixgbe 0000:05:00.0: failed to load because an
> unsupported
> > >> SFP+ or QSFP module type was detected.
> > >> [ +0,000003] ixgbe 0000:05:00.0: Reload the driver after installing a
> > >> supported module.
> > >> [ +1,136444] ixgbe 0000:05:00.1: Multiqueue Enabled: Rx Queue count =
> > 8,
> > >> Tx Queue count = 8 XDP Queue count = 0
> > >> [ +0,000287] ixgbe 0000:05:00.1: 32.000 Gb/s available PCIe bandwidth
> > (5
> > >> GT/s x8 link)
> > >> [ +0,000122] ixgbe 0000:05:00.1: MAC: 2, PHY: 1, PBA No: Unknown
> > >> [ +0,000001] ixgbe 0000:05:00.1: 00:1b:21:c0:2b:3e
> > >> [ +0,000925] ixgbe 0000:05:00.1: Intel(R) 10 Gigabit Network
> Connection
> > >> [ +0,000020] libphy: ixgbe-mdio: probed
> > >> [ +0,000283] ixgbe 0000:05:00.1 enp5s0f1: renamed from eth0
> > >> [ +0,284290] ixgbe 0000:11:00.0: Multiqueue Enabled: Rx Queue count =
> > 8,
> > >> Tx Queue count = 8 XDP Queue count = 0
> > >> [ +0,084721] ixgbe 0000:11:00.0: 16.000 Gb/s available PCIe
> bandwidth,
> > >> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s
> with 5
> > >> GT/s x8 link)
> > >> [ +0,096802] ixgbe 0000:11:00.0: MAC: 3, PHY: 0, PBA No: G45270-003
> > >> [ +0,000005] ixgbe 0000:11:00.0: a0:36:9f:21:09:94
> > >> [ +0,135326] ixgbe 0000:11:00.0 enp17s0f0: renamed from eth0
> > >> [ +0,013640] ixgbe 0000:11:00.0: Intel(R) 10 Gigabit Network
> Connection
> > >> [ +0,000034] libphy: ixgbe-mdio: probed
> > >> [ +0,285534] ixgbe 0000:11:00.1: Multiqueue Enabled: Rx Queue count =
> > 8,
> > >> Tx Queue count = 8 XDP Queue count = 0
> > >> [ +0,084750] ixgbe 0000:11:00.1: 16.000 Gb/s available PCIe
> bandwidth,
> > >> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s
> with 5
> > >> GT/s x8 link)
> > >> [ +0,096847] ixgbe 0000:11:00.1: MAC: 3, PHY: 0, PBA No: G45270-003
> > >> [ +0,000005] ixgbe 0000:11:00.1: a0:36:9f:21:09:96
> > >> [ +0,135471] ixgbe 0000:11:00.1 enp17s0f1: renamed from eth0
> > >> [ +0,012827] ixgbe 0000:11:00.1: Intel(R) 10 Gigabit Network
> Connection
> > >> [ +0,000028] libphy: ixgbe-mdio: probed
> > >> [fev21 09:25] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
> > >> version 5.1.0-k
> > >> [ +0,000004] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
> > >> [ +0,022390] ixgbe 0000:05:00.0: failed to load because an
> unsupported
> > >> SFP+ or QSFP module type was detected.
> > >> [ +0,000003] ixgbe 0000:05:00.0: Reload the driver after installing a
> > >> supported module.
> > >> [ +1,136444] ixgbe 0000:05:00.1: Multiqueue Enabled: Rx Queue count =
> > 8,
> > >> Tx Queue count = 8 XDP Queue count = 0
> > >> [ +0,000287] ixgbe 0000:05:00.1: 32.000 Gb/s available PCIe bandwidth
> > (5
> > >> GT/s x8 link)
> > >> [ +0,000122] ixgbe 0000:05:00.1: MAC: 2, PHY: 1, PBA No: Unknown
> > >> [ +0,000001] ixgbe 0000:05:00.1: 00:1b:21:c0:2b:3e
> > >> [ +0,000925] ixgbe 0000:05:00.1: Intel(R) 10 Gigabit Network
> Connection
> > >> [ +0,000020] libphy: ixgbe-mdio: probed
> > >> [ +0,000283] ixgbe 0000:05:00.1 enp5s0f1: renamed from eth0
> > >> [ +0,284290] ixgbe 0000:11:00.0: Multiqueue Enabled: Rx Queue count =
> > 8,
> > >> Tx Queue count = 8 XDP Queue count = 0
> > >> [ +0,084721] ixgbe 0000:11:00.0: 16.000 Gb/s available PCIe
> bandwidth,
> > >> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s
> with 5
> > >> GT/s x8 link)
> > >> [ +0,096802] ixgbe 0000:11:00.0: MAC: 3, PHY: 0, PBA No: G45270-003
> > >> [ +0,000005] ixgbe 0000:11:00.0: a0:36:9f:21:09:94
> > >> [ +0,135326] ixgbe 0000:11:00.0 enp17s0f0: renamed from eth0
> > >> [ +0,013640] ixgbe 0000:11:00.0: Intel(R) 10 Gigabit Network
> Connection
> > >> [ +0,000034] libphy: ixgbe-mdio: probed
> > >> [ +0,285534] ixgbe 0000:11:00.1: Multiqueue Enabled: Rx Queue count =
> > 8,
> > >> Tx Queue count = 8 XDP Queue count = 0
> > >> [ +0,084750] ixgbe 0000:11:00.1: 16.000 Gb/s available PCIe
> bandwidth,
> > >> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s
> with 5
> > >> GT/s x8 link)
> > >> [ +0,096847] ixgbe 0000:11:00.1: MAC: 3, PHY: 0, PBA No: G45270-003
> > >> [ +0,000005] ixgbe 0000:11:00.1: a0:36:9f:21:09:96
> > >> [ +0,135471] ixgbe 0000:11:00.1 enp17s0f1: renamed from eth0
> > >> [ +0,012827] ixgbe 0000:11:00.1: Intel(R) 10 Gigabit Network
> Connection
> > >> [ +0,000028] libphy: ixgbe-mdio: probed
> > >>
> > >>
> > >> Em sex., 21 de fev. de 2020 às 09:07, Nuno Vieira <nuno at hashpower.pt>
> > >> escreveu:
> > >>
> > >> > Em linux nunca tive problemas. Não uso freebsd, nao faço ideia de
> > como
> > >> > resolver, mas certamente que haverá solucao.
> > >> >
> > >> > Nuno Vieira
> > >> >
> > >> > # hashpower - datacenter and it services
> > >> > Leiria | Portugal
> > >> >
> > >> > p: +351308814400
> > >> > e: nuno at hashpower.pt
> > >> > w: https://hashpower.pt
> > >> >
> > >> > ----- Original Message -----
> > >> > > From: "Lucas Willian Bocchi" <lucas.bocchi at gmail.com>
> > >> > > To: "Grupo de Trabalho de Engenharia e Operacao de Redes" <
> > >> > gter at eng.registro.br>
> > >> > > Sent: Friday, 21 February, 2020 12:02:25
> > >> > > Subject: Re: [GTER] Experiência placas OCE11102
> > >> >
> > >> > > Ih nuno.
> > >> > > Se eu te contar quantas vezes já me incomodei com isso aí.
> > >> Simplesmente
> > >> > não
> > >> > > funciona direito. Pro Freebsd não vai, pro Linux vai dependendo da
> > >> versão
> > >> > > do kernel. Confiar nisso aí é igual mega-sena.
> > >> > >
> > >> > > Em sex., 21 de fev. de 2020 às 08:51, Nuno Vieira <
> > nuno at hashpower.pt>
> > >> > > escreveu:
> > >> > >
> > >> > >> Boas,
> > >> > >>
> > >> > >> Nunca tive problemas com os oticos da FS, Edgeoptic e da
> Flexoptix
> > >> > >>
> > >> > >> De qualquer forma, ve se isto aqui não te ajuda a resolver:
> > >> > >>
> > >> > >>
> > >> > >>
> > >> >
> > >>
> >
> https://route1.ph/2019/09/27/stretch-ixgbe-driver-allow-unsupported-sfp-modules-on-intel-x520-cards/
> > >> > >>
> > >> > >> regards,
> > >> > >>
> > >> > >> Nuno Vieira
> > >> > >>
> > >> > >> # hashpower - datacenter and it services
> > >> > >> Leiria | Portugal
> > >> > >>
> > >> > >> p: +351308814400
> > >> > >> e: nuno at hashpower.pt
> > >> > >> w: https://hashpower.pt
> > >> > >>
> > >> > >> ----- Original Message -----
> > >> > >> > From: "Lucas Willian Bocchi" <lucas.bocchi at gmail.com>
> > >> > >> > Cc: "Grupo de Trabalho de Engenharia e Operacao de Redes" <
> > >> > >> gter at eng.registro.br>
> > >> > >> > Sent: Friday, 21 February, 2020 10:50:29
> > >> > >> > Subject: Re: [GTER] Experiência placas OCE11102
> > >> > >>
> > >> > >> > Alguém já conseguiu colocar um gbic monomodo numa Intel 82599ES
> > >> dual?
> > >> > Se
> > >> > >> > sim poderia dizer qual a marca e o modelo?
> > >> > >> > Essas placas são boas, porém essa chatisse de não suportar
> > qualquer
> > >> > SFP é
> > >> > >> > um pé no saco.
> > >> > >> > --
> > >> > >> > gter list https://eng.registro.br/mailman/listinfo/gter
> > >> > >> --
> > >> > >> gter list https://eng.registro.br/mailman/listinfo/gter
> > >> > >>
> > >> > > --
> > >> > > gter list https://eng.registro.br/mailman/listinfo/gter
> > >> > --
> > >> > gter list https://eng.registro.br/mailman/listinfo/gter
> > >> >
> > >> --
> > >> gter list https://eng.registro.br/mailman/listinfo/gter
> > >>
> > >
> > --
> > gter list https://eng.registro.br/mailman/listinfo/gter
> >
> --
> gter list https://eng.registro.br/mailman/listinfo/gter
>
More information about the gter
mailing list