[GTER] Experiência placas OCE11102

Renan Menezes renanitmanager at gmail.com
Fri Feb 21 13:23:04 -03 2020 

Encontrei aqui:

No /boot/loader.conf.local coloque:
hw.ixgbe.unsupported_sfp=1,1

No /etc/modprobe.d/ixgbe.conf coloque:
options ixgbe allow_unsupported_sfp=1,1

Em sex., 21 de fev. de 2020 às 13:04, Renan Menezes <
renanitmanager at gmail.com> escreveu:

> No freebsd você pode usar a configuração nos arquivos do Módulo.
>
> O pulo do gato e que no SFP você deverá colocar se tiver 2 sfp na Placa ou
> Duas placas com 1 SFP você no mesmo arquivo
>
> modprobe ixgbe allow_unsupported_sfp=1,1
>
> ou
>
> Com a linha:
>
> /boot/loader.conf
> hw.ixgbe.unsupported_sfp=1,1
>
> Se você tiver duas placas com dois SFP
>
>   hw.ixgbe.unsupported_sfp=1,1,1,1
>
> Bem estranho, mas foi assim que funcionou comigo.
>
> Em algumas versões será no arquivo de configuração do Módulo a sintaxe é a
> mesma.
>
>
> Em sex, 21 de fev de 2020 09:27, Lucas Willian Bocchi <
> lucas.bocchi at gmail.com> escreveu:
>
>> Nuno
>> Exemplo quentinho do forno
>>
>> root at srvLucas:~# rmmod ixgbe
>> root at srvLucas:~# modprobe ixgbe allow_unsupported_sfp=1
>> root at srvLucas:~# dmesg -TH
>> [fev21 09:25] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
>> version 5.1.0-k
>> [  +0,000004] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
>> [  +0,022390] ixgbe 0000:05:00.0: failed to load because an unsupported
>> SFP+ or QSFP module type was detected.
>> [  +0,000003] ixgbe 0000:05:00.0: Reload the driver after installing a
>> supported module.
>> [  +1,136444] ixgbe 0000:05:00.1: Multiqueue Enabled: Rx Queue count = 8,
>> Tx Queue count = 8 XDP Queue count = 0
>> [  +0,000287] ixgbe 0000:05:00.1: 32.000 Gb/s available PCIe bandwidth (5
>> GT/s x8 link)
>> [  +0,000122] ixgbe 0000:05:00.1: MAC: 2, PHY: 1, PBA No: Unknown
>> [  +0,000001] ixgbe 0000:05:00.1: 00:1b:21:c0:2b:3e
>> [  +0,000925] ixgbe 0000:05:00.1: Intel(R) 10 Gigabit Network Connection
>> [  +0,000020] libphy: ixgbe-mdio: probed
>> [  +0,000283] ixgbe 0000:05:00.1 enp5s0f1: renamed from eth0
>> [  +0,284290] ixgbe 0000:11:00.0: Multiqueue Enabled: Rx Queue count = 8,
>> Tx Queue count = 8 XDP Queue count = 0
>> [  +0,084721] ixgbe 0000:11:00.0: 16.000 Gb/s available PCIe bandwidth,
>> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 5
>> GT/s x8 link)
>> [  +0,096802] ixgbe 0000:11:00.0: MAC: 3, PHY: 0, PBA No: G45270-003
>> [  +0,000005] ixgbe 0000:11:00.0: a0:36:9f:21:09:94
>> [  +0,135326] ixgbe 0000:11:00.0 enp17s0f0: renamed from eth0
>> [  +0,013640] ixgbe 0000:11:00.0: Intel(R) 10 Gigabit Network Connection
>> [  +0,000034] libphy: ixgbe-mdio: probed
>> [  +0,285534] ixgbe 0000:11:00.1: Multiqueue Enabled: Rx Queue count = 8,
>> Tx Queue count = 8 XDP Queue count = 0
>> [  +0,084750] ixgbe 0000:11:00.1: 16.000 Gb/s available PCIe bandwidth,
>> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 5
>> GT/s x8 link)
>> [  +0,096847] ixgbe 0000:11:00.1: MAC: 3, PHY: 0, PBA No: G45270-003
>> [  +0,000005] ixgbe 0000:11:00.1: a0:36:9f:21:09:96
>> [  +0,135471] ixgbe 0000:11:00.1 enp17s0f1: renamed from eth0
>> [  +0,012827] ixgbe 0000:11:00.1: Intel(R) 10 Gigabit Network Connection
>> [  +0,000028] libphy: ixgbe-mdio: probed
>> [fev21 09:25] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
>> version 5.1.0-k
>> [  +0,000004] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
>> [  +0,022390] ixgbe 0000:05:00.0: failed to load because an unsupported
>> SFP+ or QSFP module type was detected.
>> [  +0,000003] ixgbe 0000:05:00.0: Reload the driver after installing a
>> supported module.
>> [  +1,136444] ixgbe 0000:05:00.1: Multiqueue Enabled: Rx Queue count = 8,
>> Tx Queue count = 8 XDP Queue count = 0
>> [  +0,000287] ixgbe 0000:05:00.1: 32.000 Gb/s available PCIe bandwidth (5
>> GT/s x8 link)
>> [  +0,000122] ixgbe 0000:05:00.1: MAC: 2, PHY: 1, PBA No: Unknown
>> [  +0,000001] ixgbe 0000:05:00.1: 00:1b:21:c0:2b:3e
>> [  +0,000925] ixgbe 0000:05:00.1: Intel(R) 10 Gigabit Network Connection
>> [  +0,000020] libphy: ixgbe-mdio: probed
>> [  +0,000283] ixgbe 0000:05:00.1 enp5s0f1: renamed from eth0
>> [  +0,284290] ixgbe 0000:11:00.0: Multiqueue Enabled: Rx Queue count = 8,
>> Tx Queue count = 8 XDP Queue count = 0
>> [  +0,084721] ixgbe 0000:11:00.0: 16.000 Gb/s available PCIe bandwidth,
>> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 5
>> GT/s x8 link)
>> [  +0,096802] ixgbe 0000:11:00.0: MAC: 3, PHY: 0, PBA No: G45270-003
>> [  +0,000005] ixgbe 0000:11:00.0: a0:36:9f:21:09:94
>> [  +0,135326] ixgbe 0000:11:00.0 enp17s0f0: renamed from eth0
>> [  +0,013640] ixgbe 0000:11:00.0: Intel(R) 10 Gigabit Network Connection
>> [  +0,000034] libphy: ixgbe-mdio: probed
>> [  +0,285534] ixgbe 0000:11:00.1: Multiqueue Enabled: Rx Queue count = 8,
>> Tx Queue count = 8 XDP Queue count = 0
>> [  +0,084750] ixgbe 0000:11:00.1: 16.000 Gb/s available PCIe bandwidth,
>> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 5
>> GT/s x8 link)
>> [  +0,096847] ixgbe 0000:11:00.1: MAC: 3, PHY: 0, PBA No: G45270-003
>> [  +0,000005] ixgbe 0000:11:00.1: a0:36:9f:21:09:96
>> [  +0,135471] ixgbe 0000:11:00.1 enp17s0f1: renamed from eth0
>> [  +0,012827] ixgbe 0000:11:00.1: Intel(R) 10 Gigabit Network Connection
>> [  +0,000028] libphy: ixgbe-mdio: probed
>>
>>
>> Em sex., 21 de fev. de 2020 às 09:07, Nuno Vieira <nuno at hashpower.pt>
>> escreveu:
>>
>> > Em linux nunca tive problemas.  Não uso freebsd, nao faço ideia de como
>> > resolver, mas certamente que haverá solucao.
>> >
>> > Nuno Vieira
>> >
>> > # hashpower - datacenter and it services
>> > Leiria | Portugal
>> >
>> > p: +351308814400
>> > e: nuno at hashpower.pt
>> > w: https://hashpower.pt
>> >
>> > ----- Original Message -----
>> > > From: "Lucas Willian Bocchi" <lucas.bocchi at gmail.com>
>> > > To: "Grupo de Trabalho de Engenharia e Operacao de Redes" <
>> > gter at eng.registro.br>
>> > > Sent: Friday, 21 February, 2020 12:02:25
>> > > Subject: Re: [GTER] Experiência placas OCE11102
>> >
>> > > Ih nuno.
>> > > Se eu te contar quantas vezes já me incomodei com isso aí.
>> Simplesmente
>> > não
>> > > funciona direito. Pro Freebsd não vai, pro Linux vai dependendo da
>> versão
>> > > do kernel. Confiar nisso aí é igual mega-sena.
>> > >
>> > > Em sex., 21 de fev. de 2020 às 08:51, Nuno Vieira <nuno at hashpower.pt>
>> > > escreveu:
>> > >
>> > >> Boas,
>> > >>
>> > >> Nunca tive problemas com os oticos da FS, Edgeoptic e da Flexoptix
>> > >>
>> > >> De qualquer forma, ve se isto aqui não te ajuda a resolver:
>> > >>
>> > >>
>> > >>
>> >
>> https://route1.ph/2019/09/27/stretch-ixgbe-driver-allow-unsupported-sfp-modules-on-intel-x520-cards/
>> > >>
>> > >> regards,
>> > >>
>> > >> Nuno Vieira
>> > >>
>> > >> # hashpower - datacenter and it services
>> > >> Leiria | Portugal
>> > >>
>> > >> p: +351308814400
>> > >> e: nuno at hashpower.pt
>> > >> w: https://hashpower.pt
>> > >>
>> > >> ----- Original Message -----
>> > >> > From: "Lucas Willian Bocchi" <lucas.bocchi at gmail.com>
>> > >> > Cc: "Grupo de Trabalho de Engenharia e Operacao de Redes" <
>> > >> gter at eng.registro.br>
>> > >> > Sent: Friday, 21 February, 2020 10:50:29
>> > >> > Subject: Re: [GTER] Experiência placas OCE11102
>> > >>
>> > >> > Alguém já conseguiu colocar um gbic monomodo numa Intel 82599ES
>> dual?
>> > Se
>> > >> > sim poderia dizer qual a marca e o modelo?
>> > >> > Essas placas são boas, porém essa chatisse de não suportar qualquer
>> > SFP é
>> > >> > um pé no saco.
>> > >> > --
>> > >> > gter list    https://eng.registro.br/mailman/listinfo/gter
>> > >> --
>> > >> gter list    https://eng.registro.br/mailman/listinfo/gter
>> > >>
>> > > --
>> > > gter list    https://eng.registro.br/mailman/listinfo/gter
>> > --
>> > gter list    https://eng.registro.br/mailman/listinfo/gter
>> >
>> --
>> gter list    https://eng.registro.br/mailman/listinfo/gter
>>
>

More information about the gter mailing list