[GTER] Experiência placas OCE11102

Fri Feb 21 13:04:08 -03 2020

No freebsd você pode usar a configuração nos arquivos do Módulo.

O pulo do gato e que no SFP você deverá colocar se tiver 2 sfp na Placa ou
Duas placas com 1 SFP você no mesmo arquivo

modprobe ixgbe allow_unsupported_sfp=1,1

ou

Com a linha:

/boot/loader.conf
hw.ixgbe.unsupported_sfp=1,1

Se você tiver duas placas com dois SFP

  hw.ixgbe.unsupported_sfp=1,1,1,1

Bem estranho, mas foi assim que funcionou comigo.

Em algumas versões será no arquivo de configuração do Módulo a sintaxe é a
mesma.

Em sex, 21 de fev de 2020 09:27, Lucas Willian Bocchi <
lucas.bocchi at gmail.com> escreveu:

> Nuno
> Exemplo quentinho do forno
>
> root at srvLucas:~# rmmod ixgbe
> root at srvLucas:~# modprobe ixgbe allow_unsupported_sfp=1
> root at srvLucas:~# dmesg -TH
> [fev21 09:25] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
> version 5.1.0-k
> [  +0,000004] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
> [  +0,022390] ixgbe 0000:05:00.0: failed to load because an unsupported
> SFP+ or QSFP module type was detected.
> [  +0,000003] ixgbe 0000:05:00.0: Reload the driver after installing a
> supported module.
> [  +1,136444] ixgbe 0000:05:00.1: Multiqueue Enabled: Rx Queue count = 8,
> Tx Queue count = 8 XDP Queue count = 0
> [  +0,000287] ixgbe 0000:05:00.1: 32.000 Gb/s available PCIe bandwidth (5
> GT/s x8 link)
> [  +0,000122] ixgbe 0000:05:00.1: MAC: 2, PHY: 1, PBA No: Unknown
> [  +0,000001] ixgbe 0000:05:00.1: 00:1b:21:c0:2b:3e
> [  +0,000925] ixgbe 0000:05:00.1: Intel(R) 10 Gigabit Network Connection
> [  +0,000020] libphy: ixgbe-mdio: probed
> [  +0,000283] ixgbe 0000:05:00.1 enp5s0f1: renamed from eth0
> [  +0,284290] ixgbe 0000:11:00.0: Multiqueue Enabled: Rx Queue count = 8,
> Tx Queue count = 8 XDP Queue count = 0
> [  +0,084721] ixgbe 0000:11:00.0: 16.000 Gb/s available PCIe bandwidth,
> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 5
> GT/s x8 link)
> [  +0,096802] ixgbe 0000:11:00.0: MAC: 3, PHY: 0, PBA No: G45270-003
> [  +0,000005] ixgbe 0000:11:00.0: a0:36:9f:21:09:94
> [  +0,135326] ixgbe 0000:11:00.0 enp17s0f0: renamed from eth0
> [  +0,013640] ixgbe 0000:11:00.0: Intel(R) 10 Gigabit Network Connection
> [  +0,000034] libphy: ixgbe-mdio: probed
> [  +0,285534] ixgbe 0000:11:00.1: Multiqueue Enabled: Rx Queue count = 8,
> Tx Queue count = 8 XDP Queue count = 0
> [  +0,084750] ixgbe 0000:11:00.1: 16.000 Gb/s available PCIe bandwidth,
> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 5
> GT/s x8 link)
> [  +0,096847] ixgbe 0000:11:00.1: MAC: 3, PHY: 0, PBA No: G45270-003
> [  +0,000005] ixgbe 0000:11:00.1: a0:36:9f:21:09:96
> [  +0,135471] ixgbe 0000:11:00.1 enp17s0f1: renamed from eth0
> [  +0,012827] ixgbe 0000:11:00.1: Intel(R) 10 Gigabit Network Connection
> [  +0,000028] libphy: ixgbe-mdio: probed
> [fev21 09:25] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
> version 5.1.0-k
> [  +0,000004] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
> [  +0,022390] ixgbe 0000:05:00.0: failed to load because an unsupported
> SFP+ or QSFP module type was detected.
> [  +0,000003] ixgbe 0000:05:00.0: Reload the driver after installing a
> supported module.
> [  +1,136444] ixgbe 0000:05:00.1: Multiqueue Enabled: Rx Queue count = 8,
> Tx Queue count = 8 XDP Queue count = 0
> [  +0,000287] ixgbe 0000:05:00.1: 32.000 Gb/s available PCIe bandwidth (5
> GT/s x8 link)
> [  +0,000122] ixgbe 0000:05:00.1: MAC: 2, PHY: 1, PBA No: Unknown
> [  +0,000001] ixgbe 0000:05:00.1: 00:1b:21:c0:2b:3e
> [  +0,000925] ixgbe 0000:05:00.1: Intel(R) 10 Gigabit Network Connection
> [  +0,000020] libphy: ixgbe-mdio: probed
> [  +0,000283] ixgbe 0000:05:00.1 enp5s0f1: renamed from eth0
> [  +0,284290] ixgbe 0000:11:00.0: Multiqueue Enabled: Rx Queue count = 8,
> Tx Queue count = 8 XDP Queue count = 0
> [  +0,084721] ixgbe 0000:11:00.0: 16.000 Gb/s available PCIe bandwidth,
> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 5
> GT/s x8 link)
> [  +0,096802] ixgbe 0000:11:00.0: MAC: 3, PHY: 0, PBA No: G45270-003
> [  +0,000005] ixgbe 0000:11:00.0: a0:36:9f:21:09:94
> [  +0,135326] ixgbe 0000:11:00.0 enp17s0f0: renamed from eth0
> [  +0,013640] ixgbe 0000:11:00.0: Intel(R) 10 Gigabit Network Connection
> [  +0,000034] libphy: ixgbe-mdio: probed
> [  +0,285534] ixgbe 0000:11:00.1: Multiqueue Enabled: Rx Queue count = 8,
> Tx Queue count = 8 XDP Queue count = 0
> [  +0,084750] ixgbe 0000:11:00.1: 16.000 Gb/s available PCIe bandwidth,
> limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 5
> GT/s x8 link)
> [  +0,096847] ixgbe 0000:11:00.1: MAC: 3, PHY: 0, PBA No: G45270-003
> [  +0,000005] ixgbe 0000:11:00.1: a0:36:9f:21:09:96
> [  +0,135471] ixgbe 0000:11:00.1 enp17s0f1: renamed from eth0
> [  +0,012827] ixgbe 0000:11:00.1: Intel(R) 10 Gigabit Network Connection
> [  +0,000028] libphy: ixgbe-mdio: probed
>
>
> Em sex., 21 de fev. de 2020 às 09:07, Nuno Vieira <nuno at hashpower.pt>
> escreveu:
>
> > Em linux nunca tive problemas.  Não uso freebsd, nao faço ideia de como
> > resolver, mas certamente que haverá solucao.
> >
> > Nuno Vieira
> >
> > # hashpower - datacenter and it services
> > Leiria | Portugal
> >
> > p: +351308814400
> > e: nuno at hashpower.pt
> > w: https://hashpower.pt
> >
> > ----- Original Message -----
> > > From: "Lucas Willian Bocchi" <lucas.bocchi at gmail.com>
> > > To: "Grupo de Trabalho de Engenharia e Operacao de Redes" <
> > gter at eng.registro.br>
> > > Sent: Friday, 21 February, 2020 12:02:25
> > > Subject: Re: [GTER] Experiência placas OCE11102
> >
> > > Ih nuno.
> > > Se eu te contar quantas vezes já me incomodei com isso aí. Simplesmente
> > não
> > > funciona direito. Pro Freebsd não vai, pro Linux vai dependendo da
> versão
> > > do kernel. Confiar nisso aí é igual mega-sena.
> > >
> > > Em sex., 21 de fev. de 2020 às 08:51, Nuno Vieira <nuno at hashpower.pt>
> > > escreveu:
> > >
> > >> Boas,
> > >>
> > >> Nunca tive problemas com os oticos da FS, Edgeoptic e da Flexoptix
> > >>
> > >> De qualquer forma, ve se isto aqui não te ajuda a resolver:
> > >>
> > >>
> > >>
> >
> https://route1.ph/2019/09/27/stretch-ixgbe-driver-allow-unsupported-sfp-modules-on-intel-x520-cards/
> > >>
> > >> regards,
> > >>
> > >> Nuno Vieira
> > >>
> > >> # hashpower - datacenter and it services
> > >> Leiria | Portugal
> > >>
> > >> p: +351308814400
> > >> e: nuno at hashpower.pt
> > >> w: https://hashpower.pt
> > >>
> > >> ----- Original Message -----
> > >> > From: "Lucas Willian Bocchi" <lucas.bocchi at gmail.com>
> > >> > Cc: "Grupo de Trabalho de Engenharia e Operacao de Redes" <
> > >> gter at eng.registro.br>
> > >> > Sent: Friday, 21 February, 2020 10:50:29
> > >> > Subject: Re: [GTER] Experiência placas OCE11102
> > >>
> > >> > Alguém já conseguiu colocar um gbic monomodo numa Intel 82599ES
> dual?
> > Se
> > >> > sim poderia dizer qual a marca e o modelo?
> > >> > Essas placas são boas, porém essa chatisse de não suportar qualquer
> > SFP é
> > >> > um pé no saco.
> > >> > --
> > >> > gter list    https://eng.registro.br/mailman/listinfo/gter
> > >> --
> > >> gter list    https://eng.registro.br/mailman/listinfo/gter
> > >>
> > > --
> > > gter list    https://eng.registro.br/mailman/listinfo/gter
> > --
> > gter list    https://eng.registro.br/mailman/listinfo/gter
> >
> --
> gter list    https://eng.registro.br/mailman/listinfo/gter
>