[GTER] Duvida controle de Fluxo acesso Backbone

[Kaio Vilar]

Srs, estou com uma duvida cruel.

De um lado temos o controle de fluxo aplicado pelo que me parece, essa mesma
configuração precisa ser aplicado no BACKBONE? Isso traz algum prejuízo ao
circuito?



GigabitEthernet0/0 is up, line protocol is up

  Hardware is MV96340 Ethernet, address is 6416.8d24.0960 (bia
6416.8d24.0960)

  Description:  20000K )

  Internet address is x.x.x.x <http://200.252.225.182/30>

  MTU 1500 bytes, BW 20000 Kbit/sec, DLY 100 usec,

     reliability 255/255, txload 67/255, rxload 102/255

  Encapsulation ARPA, loopback not set

  Keepalive set (10 sec)

  Full-duplex, 100Mb/s, media type is T

  output flow-control is XON, input flow-control is XON

  ARP type: ARPA, ARP Timeout 04:00:00

  Last input 00:00:00, output 00:00:00, output hang never

  Last clearing of "show interface" counters never

  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

  Queueing strategy: FIFO





acc08.bsa#sh int fastEthernet 2/0/0

FastEthernet2/0/0 is up, line protocol is up

  Hardware is cyBus FastEthernet Interface, address is 0015.f965.7b40 (bia
0015.f965.7b40)

  Description:  20M

  Internet address is x.x.x.x <http://200.252.225.181/30>

  MTU 1500 bytes, BW 20000 Kbit, DLY 100 usec,

     reliability 255/255, txload 179/255, rxload 29/255

  Encapsulation ARPA, loopback not set

  Keepalive set (10 sec)

  Full-duplex, 100Mb/s, 100BaseTX/FX

  ARP type: ARPA, ARP Timeout 04:00:00

  Last input 00:00:06, output 00:00:05, output hang never

  Last clearing of "show interface" counters 19w5d

  Input queue: 0/75/0/2 (size/max/drops/flushes); Total output drops: 435

  Queueing strategy: Class-based queueing

  Output queue: 0/40 (size/max)