[GTER] Velocidade contratada Link Internet

[Celso Pelliccioli]

Saída do comando show interface.



Horário
14:36


Router60.1#show interface serial1/0
Serial1/0 is up, line protocol is up
  Hardware is PowerQUICC Serial
  Description: LinkInternetEmbratel
  Internet address is xxx.xxx.xxx.xxx/30
  MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
     reliability 255/255, txload 181/255, rxload 49/255
  Encapsulation PPP, LCP Open
  Open: IPCP, loopback not set
  Last input 00:00:06, output 00:00:00, output hang never
  Last clearing of "show interface" counters 1w0d
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 53668
  Queueing strategy: weighted fair
  Output queue: 11/1000/64/53668 (size/max total/threshold/drops)
     Conversations  3/94/256 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
     Available Bandwidth 1158 kilobits/sec
  5 minute input rate 302000 bits/sec, 241 packets/sec
  5 minute output rate 1101000 bits/sec, 260 packets/sec
     51530776 packets input, 1402995053 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     52149388 packets output, 2053321517 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
     DCD=up  DSR=up  DTR=up  RTS=up  CTS=up




14:42

Router60.1#show interface serial1/0
Serial1/0 is up, line protocol is up
  Hardware is PowerQUICC Serial
  Description: LinkInternetEmbratel
  Internet address is xxx.xxx.xxx.xxx/30
  MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
     reliability 255/255, txload 190/255, rxload 133/255
  Encapsulation PPP, LCP Open
  Open: IPCP, loopback not set
  Last input 00:00:05, output 00:00:00, output hang never
  Last clearing of "show interface" counters 1w0d
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 53678
  Queueing strategy: weighted fair
  Output queue: 7/1000/64/53678 (size/max total/threshold/drops)
     Conversations  2/94/256 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
     Available Bandwidth 1158 kilobits/sec
  5 minute input rate 809000 bits/sec, 306 packets/sec
  5 minute output rate 1308000 bits/sec, 306 packets/sec
     51647476 packets input, 1444923585 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     52263414 packets output, 2113701727 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
     DCD=up  DSR=up  DTR=up  RTS=up  CTS=up


On 4/17/06, Diego <diegooli at terra.com.br> wrote:
>
> Olá Celso,
>
> A saída do comando show  interface serial<X> mostra somente os 1.5 MB??
> Caso positivou procure também por Bugs relacionados a sua plataforma e
> versão do IOS.
> Um outro teste que você pode fazer é tentar saturar o seu link (use alguma
> ferramenta para gerar tráfego e gere este tráfego para a interface
> ethernet
> do router) e monitore as interfaces.
>
> Diego Oliveira
> CCNP, CCSP, CCIP, CCDP, LPI
> ciscotalk.blog.terra.com.br
>
>
> ----- Original Message -----
> From: "Celso Pelliccioli" <pelliccioli at gmail.com>
> To: "Grupo de Trabalho de Engenharia e Operacao de Redes"
> <gter at eng.registro.br>
> Sent: Monday, April 17, 2006 2:34 PM
> Subject: Re: [GTER] Velocidade contratada Link Internet
>
>
> Não deixei default o bandwith. Irei re-configurar o router talvez seja
> isso
> mesmo. Utilizo a ferramenta Netflow Analizer 4.
>
> On 4/17/06, hterada2000 <hterada2000 at gmail.com> wrote:
> >
> > Celso Pelliccioli escreveu:
> > > Bom Dia.
> > >
> > > Contratei um link para Internet com uma operadora cuja a velocidade é
> de
> > 2
> > > Mbps. Pelo site da operadora o gráfico na interface apresenta o valor
> de
> > 2M,
> > > eu utiliza o netflow para monitorar alguns routers. No router
> utilizado
> > pela
> > > Internet o netflow mostra a velociadade de 1.5. Será que o modem
> > instalado
> > > pela operador está configurado para somente 1.5 M.
> > > O meu router é um cisco e conforme o manual a serial suporta a
> > velocidade de
> > > 2 M. Alguem sabe o que pode ser ?
> > >
> > > Muito Obrigado
> > > Celso
> > > --
> > > gter list    https://eng.registro.br/mailman/listinfo/gter
> > >
> > >
> > Vc configurou o bandwidth ? O bandwidth defalut é 1.5M (T1) .
> >
> > [ ]s Terada
> >
> >
> > --
> > gter list    https://eng.registro.br/mailman/listinfo/gter
> >
> --
> gter list    https://eng.registro.br/mailman/listinfo/gter
>
> --
> gter list    https://eng.registro.br/mailman/listinfo/gter
>