[GTER] VRF CISCO+Juniper

[Délsio Cabá]

Caros,

Estou enfrentando alguma dificuldade em ter uma vrf entre cisco e juniper
abaixo partilho a configuracao efectuada

CISCO:
vrf definition S1-EPC
 rd 1.1.1.1:1
 route-target export 1.1.1.1:1
 route-target import 1.1.1.1:1
 !
 address-family ipv4
  route-target export 1.1.1.1:1
  route-target import 1.1.1.1:1
 exit-address-family

interface GigabitEthernet0/0/0.101
 description S1
 encapsulation dot1Q 101
 vrf forwarding S1-EPC
 ip address 10.10.5.9 255.255.255.248



JUNIPER:
routing-instances {
    S1-EPC {
        instance-type vrf;
        interface lo0.2;
        route-distinguisher 1.1.1.1:1;
        vrf-target target:1.1.1.1:1;
        vrf-table-label;
        routing-options {
            auto-export;
        }
    }
}
routing-options {
    graceful-restart;
    router-id 10.200.0.40;
    route-distinguisher-id 10.200.0.40;
    autonomous-system xxxx
}
protocols {
    mpls {
        traffic-engineering {
            mpls-forwarding;
        }
        interface ge-1/0/2.0;
        interface lo0.0;
        interface xe-1/3/1.0;
        interface ge-1/0/0.0;
        interface ge-1/0/1.0;
    }
    bgp {
        local-address 10.200.0.40;
        no-advertise-peer-as;
        mtu-discovery;
        log-updown;
        export ibgp-export;
        peer-as xxxx
        local-as xxxx
        graceful-restart {
            restart-time 180;
            stale-routes-time 500;
        }
        group ibgp {
            type internal;
            export [ next-hop-self ibgp-export ];
            neighbor 10.200.0.253 {
                family inet-vpn {
                    unicast;
                    any;
                }
            }




BGP table version is 70, local router ID is 10.200.0.253
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
              x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found

     Network          Next Hop            Metric LocPrf Weight Path
Route Distinguisher: 1.1.1.1:1 (default for vrf S1-EPC)
 *>i 203.0.113.0      10.200.0.40                   100      0 i
 *>i 203.0.113.2/32   10.200.0.40                   100      0 i


CORE-RTR#show ip route vrf S1-EPC

Routing Table: S1-EPC
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       a - application route
       + - replicated route, % - next hop override, p - overrides from PfR

Gateway of last resort is not set

      10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
C        10.10.5.8/29 is directly connected, GigabitEthernet0/0/0.101
L        10.10.5.9/32 is directly connected, GigabitEthernet0/0/0.101
C        10.10.100.1/32 is directly connected, Loopback2
      203.0.113.0/24 is variably subnetted, 2 subnets, 2 masks
B        203.0.113.0/24 [200/0] via 10.200.0.40, 00:00:02
B        203.0.113.2/32 [200/0] via 10.200.0.40, 00:00:02
CORE-RTR#ping vr
CORE-RTR#ping vrf S1-EPC 203.0.113.2 sou
CORE-RTR#ping vrf S1-EPC 203.0.113.2 source  10.10.5.9
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 203.0.113.2, timeout is 2 seconds:
Packet sent with a source address of 10.10.5.9
.....
Success rate is 0 percent (0/5)

delsio at POP-PH1> show route  table S1-EPC

S1-EPC.inet.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

203.0.113.0/24     *[Direct/0] 00:09:44
                    > via lo0.2
203.0.113.2/32     *[Local/0] 00:09:44
                      Local via lo0.2

S1-EPC.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

ff02::2/128        *[INET6/0] 00:09:45
                      MultiRecv