[GTER] Interface SFP+ 10GB não levanta.

[Marcelo Gondim]

Buenas,

A gbic usada na interface é original da Intel? Se não for pode tentar 
colocar isso em /etc/default/grub:

GRUB_CMDLINE_LINUX="ixgbe.allow_unsupported_sfp=1"

Em seguida:

# update-grub

Depois reinicia o sistema pra ver se vai levantar.

Em 08/07/2019 14:21, Deimon Machado escreveu:
> Qual versão desse Debian ? Tive problemas com uma Broadcom com 4 portas,
> tive q atualizar o pacote de firmwares, eu usava a versão 8, agora com a 9
> não tive problemas. Mas essa placa ainda não usei.
>
> Deimon.
>
> Em seg, 8 de jul de 2019 às 14:18, Adalgildo Sousa <adalgildo at gmail.com>
> escreveu:
>
>> Olá gente boa noite, estou passando por um pequeno problema, tentando
>> levantar uma interface de 10GB da intel em um servidor linux debian  (Intel
>> Corporation 82599ES 10-Gigabit SFI/SFP+) alguem ja passou por isso ?
>>
>>
>>
>> ens4f1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
>>
>>          ether 90:e2:ba:7b:19:95  txqueuelen 1000  (Ethernet)
>>
>>          RX packets 0  bytes 0 (0.0 B)
>>
>>          RX errors 0  dropped 0  overruns 0  frame 0
>>
>>          TX packets 0  bytes 0 (0.0 B)
>>
>>          TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>>
>>
>>
>>
>>
>> 05:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+
>> Network Connection (rev 01)
>>
>> 05:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+
>> Network Connection (rev 01)
>>
>>
>>
>> dmesg |grep ixgbe
>>
>> [    0.747392] ixgbe: `1,1' invalid for parameter `allow_unsupported_sfp'
>>
>> [    3.015022] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
>> version 5.1.0-k
>>
>> [    3.015023] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
>>
>> [    3.034658] ixgbe 0000:05:00.0: failed to load because an unsupported
>> SFP+ or QSFP module type was detected.
>>
>> [    3.034723] ixgbe 0000:05:00.0: Reload the driver after installing a
>> supported module.
>>
>> [    4.239719] ixgbe 0000:05:00.1: Multiqueue Enabled: Rx Queue count = 4,
>> Tx Queue count = 4 XDP Queue count = 0
>>
>> [    4.239843] ixgbe 0000:05:00.1: PCI Express bandwidth of 32GT/s
>> available
>>
>> [    4.239844] ixgbe 0000:05:00.1: (Speed:5.0GT/s, Width: x8, Encoding
>> Loss:20%)
>>
>> [    4.240161] ixgbe 0000:05:00.1: MAC: 2, PHY: 1, PBA No: G18786-004
>>
>> [    4.240162] ixgbe 0000:05:00.1: 90:e2:ba:7b:19:95
>>
>> [    4.241220] ixgbe 0000:05:00.1: Intel(R) 10 Gigabit Network Connection
>>
>> [    4.242872] ixgbe 0000:05:00.1 ens4f1: renamed from eth0
>>
>> [    4.314248] ixgbe 0000:05:00.1: registered PHC device on ens4f1
>>
>> [ 3018.793513] ixgbe 0000:05:00.1: removed PHC on ens4f1
>>
>> [ 3023.227080] ixgbe 0000:05:00.1: registered PHC device on ens4f1
>> --
>> gter list    https://eng.registro.br/mailman/listinfo/gter
>>
>