[GTER] Interface SFP+ 10GB não levanta.

[Adalgildo Sousa]

Olá gente boa noite, estou passando por um pequeno problema, tentando
levantar uma interface de 10GB da intel em um servidor linux debian  (Intel
Corporation 82599ES 10-Gigabit SFI/SFP+) alguem ja passou por isso ?



ens4f1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500

        ether 90:e2:ba:7b:19:95  txqueuelen 1000  (Ethernet)

        RX packets 0  bytes 0 (0.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 0  bytes 0 (0.0 B)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0





05:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+
Network Connection (rev 01)

05:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+
Network Connection (rev 01)



dmesg |grep ixgbe

[    0.747392] ixgbe: `1,1' invalid for parameter `allow_unsupported_sfp'

[    3.015022] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
version 5.1.0-k

[    3.015023] ixgbe: Copyright (c) 1999-2016 Intel Corporation.

[    3.034658] ixgbe 0000:05:00.0: failed to load because an unsupported
SFP+ or QSFP module type was detected.

[    3.034723] ixgbe 0000:05:00.0: Reload the driver after installing a
supported module.

[    4.239719] ixgbe 0000:05:00.1: Multiqueue Enabled: Rx Queue count = 4,
Tx Queue count = 4 XDP Queue count = 0

[    4.239843] ixgbe 0000:05:00.1: PCI Express bandwidth of 32GT/s available

[    4.239844] ixgbe 0000:05:00.1: (Speed:5.0GT/s, Width: x8, Encoding
Loss:20%)

[    4.240161] ixgbe 0000:05:00.1: MAC: 2, PHY: 1, PBA No: G18786-004

[    4.240162] ixgbe 0000:05:00.1: 90:e2:ba:7b:19:95

[    4.241220] ixgbe 0000:05:00.1: Intel(R) 10 Gigabit Network Connection

[    4.242872] ixgbe 0000:05:00.1 ens4f1: renamed from eth0

[    4.314248] ixgbe 0000:05:00.1: registered PHC device on ens4f1

[ 3018.793513] ixgbe 0000:05:00.1: removed PHC on ens4f1

[ 3023.227080] ixgbe 0000:05:00.1: registered PHC device on ens4f1