[GTER] PPPoE NE20

Bruno Vane broonu at gmail.com
Tue Apr 9 14:35:37 -03 2019


Parece ser alguma coisa relacionado com o keepalive, ou o cliente ou o BRAS
não está recebendo ou respondendo os LCP request e/ou reply.

Em seg, 8 de abr de 2019 às 11:39, Juliano GigaNET <juliano at giganet.net.py>
escreveu:

> Bom dia, estou precisando de um help de voces.
>
> Estou montando meu concentrador PPPoE em um NE20e-s2f e estou com um
> problema que me impede colocar em producao. O PPPoE conecta
> perfeitamente .. navega por alguns instantes e depois o pppoe é
> desconectado .. Depois de alguns segundos ele reconecta e assim fica o
> loop.
>
> Oque poderia ser? Alguem ja passou por este cenario / problema?
>
> Detalho abaixo minhas configuracoes atuais:
>
> dhcpv6 duid 000100018c7fbeaf002ec7dfcc12
> #
> dhcpv6 rapid-commit
> #
> ipv6 prefix pre1 local
>   prefix 2800:6900:200:21::/64
>
> ipv6 prefix pre2 delegation
>   prefix 2800:6900:2::/48 delegating-prefix-length 60
>
> ipv6 pool pool_ipv6 bas local
>   prefix pre1
>
> radius-server authorization 10.11.100.15 destination-port 3799
> shared-key-cipher (...)
>
> radius-server group giganet
>   radius-server shared-key-cipher (...)
>   radius-server authentication 10.11.100.15 1812 weight 0
>   radius-server accounting 10.11.100.15 1813 weight 0
>   radius-server type plus11
>   undo radius-server user-name domain-included
>   radius-server traffic-unit mbyte
>   radius-attribute case-sensitive qos-profile-name
>
> qos-profile DEDICADO-20M
>   car cir 21000 pir 21000 cbs 2100000 pbs 2100000 green pass yellow pass
> red discard inbound
>   car cir 21000 pir 21000 cbs 2100000 pbs 2100000 green pass yellow pass
> red discard outbound
>
> service-location 1
>   location slot 3
> #
> service-instance-group group1
>   service-location 1
> #
> nat instance 1 id 1
>   service-instance-group group1
>   nat address-group 1 group-id 1 IP_INICIO IP_FINAL
>   nat session-limit tcp 1000
>   nat session-limit udp 1000
>   nat session-limit icmp 100
>
> vlan 1011
>   description teste_pppoe_ne20
>
> ip pool pool1 bas local
>   gateway 100.64.128.1 255.255.224.0
>   section 0 100.64.128.10 100.64.159.255
>   dns-server 8.8.8.8
>
> aaa
>     authentication-scheme radius
>     authentication-mode local radius
>
>    accounting-scheme radius
>    accounting send-update
>
>    domain giganet
>       authentication-scheme radius
>       accounting-scheme radius
>       radius-server group giganet
>       ip-pool pool1
>       ipv6-pool pool_ipv6
>       ipv6-pool pool2
>
> interface Virtual-Template1
>   ppp authentication-mode chap
>   ppp keepalive interval 20 retransmit 3 response-timeout 10
>
> interface GigabitEthernet0/3/0.1
>   ipv6 enable
>   ipv6 address auto link-local
>   user-vlan 1011
>   pppoe-server bind Virtual-Template 1
>   ospf enable 1 area 0.0.0.0
>   ipv6 nd autoconfig managed-address-flag
>   ipv6 nd autoconfig other-flag
>   bas
>   #
>    access-type layer2-subscriber
>    default-domain authentication ppp-user giganet
>   #
> #
>
> --
> gter list    https://eng.registro.br/mailman/listinfo/gter
>



More information about the gter mailing list