[GTER] Subir FPC MX480

[Humberto Galiza]

Olá Soares,

Qual a tua SCB? Se a tua SCB for uma SCB-2, põe o chassi em modo
enhanced-ip e dá um reboot que em seguida o chassi vai reconhecer a
MPC4E:

set chassis network-services enhanced-ip
commit

Abs,

Humberto Galiza
On Mon, Aug 27, 2018 at 9:28 PM Soares <soares.silva at tnetsolucoes.com.br> wrote:
>
> Boa noite pessoal.
>
> Estou apanhando aqui tentando subir um FPC MPC4E 3D 32XGE  no MX480.
>
> Gostaria de saber se alguém pode nos da um help.
>
>
> >request chassis fpc online slot 0
> FPC 0 misconfigured
>
> > show chassis fpc pic-status
> Slot 0   Offline      MPC4E 3D 32XGE
>
> # Verificando
> > show chassis fpc
>
> Slot State            (C)  Total  Interrupt      1min   5min   15min  DRAM (MB) Heap     Buffer
>   0  Offline         ---FPC misconfiguration---
>   1  Empty
>   2  Empty
>   3  Empty
>   4  Empty
>   5  Empty
>
> > show chassis alarms
> 2 alarms currently active
> 2018-08-27 17:42:56 BRT  Major  Host 0 fxp0 : Ethernet Link Down
> 2018-08-27 17:42:56 BRT  Major  Host 1 fxp0 : Ethernet Link Down
>
> > show chassis power
>
> PEM 0:
>   State:     Online
>   DC input:  OK (1 feed expected, 1 feed connected)
>   DC input:  48.0 V input (53000 mV)
>   Capacity:  1440 W (maximum 1440 W)
>   DC output: 159 W (zone 0, 3 A at 53 V, 11% of capacity)
>
> PEM 1:
>   State:     Online
>   DC input:  OK (1 feed expected, 1 feed connected)
>   DC input:  48.0 V input (52500 mV)
>   Capacity:  1440 W (maximum 1440 W)
>   DC output: 0 W (zone 1, 0 A at 52 V, 0% of capacity)
>
> PEM 2:
>   State:     Online
>   DC input:  OK (1 feed expected, 1 feed connected)
>   DC input:  48.0 V input (52500 mV)
>   Capacity:  1440 W (maximum 1440 W)
>   DC output: 52 W (zone 0, 1 A at 52 V, 3% of capacity)
>
> --
> gter list    https://eng.registro.br/mailman/listinfo/gter