[GTER] Criar vlan no MX5

[Fábio - RJ Network]

Se trocar "set interfaces ge-1/0/4 unit 0 vlan-id 1" por "set interfaces
ge-1/0/4 native-vlan-id 1" funciona?


-- 
Fábio R. Hernandes
RJ Network - Tecnologia Integrada
Fone: (17) 3211 4211
www.rjnetwork.com.br


On Fri, Jan 9, 2015 at 10:57 AM, Soares <soares at tecnetce.com.br> wrote:

> Gostaria de compartilhar com os colegas o que esta de errado neta
> configuração (juniper MX5), ou se falta alguma coisa?
>
> Pois não estou pingando do outro lado.
>
> #No MX5
> set interfaces ge-1/0/4 flexible-vlan-tagging set interfaces ge-1/0/4 unit
> 0 vlan-id 1
> set interfaces ge-1/0/4 unit 18 vlan-id 18 set interfaces ge-1/0/4 unit 18
> family inet address 191.xxx.xxx.17/30
> set interfaces ge-1/0/4 unit 58 vlan-id 58 set interfaces ge-1/0/4 unit 58
> family inet address 191.xxx.xxx.57/30
> set interfaces ge-1/0/4 unit 94 vlan-id 94 set interfaces ge-1/0/4 unit 94
> family inet address 191.xxx.xxx.93/30
>
>
> #No Mikrotik
>
> /interface vlan
> add arp=enabled disabled=no interface=ether1 l2mtu=1584 mtu=1500
> name=vlan18 use-service-tag=no vlan-id=18
> /ip address
> add address=191.xxx.xxx.18/30 interface=vlan18 network=191.xxx.xxx.16
>
>
>
> Francisco Soares da Silva
> Gerente de Rede
> Tel.: (88)9616-3434
>
>
> --
> gter list    https://eng.registro.br/mailman/listinfo/gter