[GTER] placa HBA

[juliano at cdznet.com.br]

Olha eu ligo o meu servidor de backups Linux direto no robo com a hba 
com o cabo fiber. Não conheço esse termo DAS.

Ja tenho essa solução funcionando em um servidor HP, porem estou 
migrando o meu sistema de backup para um novo servidor IBM X3550 M4 e 
estou passando esse problema com essa placa.

Segue logs de erro não consegui interpretar.

Apr 10 12:05:50 backup kernel: [  328.875252] lpfc 0000:0c:00.1: 1:1305 
Link Down Event x4 received Data: x4 x20 x80011 x0 x0
Apr 10 12:05:51 backup kernel: [  330.222504] lpfc 0000:0c:00.0: 0:1305 
Link Down Event x4 received Data: x4 x20 x80011 x0 x0
Apr 10 12:06:50 backup kernel: [  388.862788]  rport-2:0-0: blocked FC 
remote port time out: removing rport
Apr 10 12:06:51 backup kernel: [  390.210566]  rport-1:0-0: blocked FC 
remote port time out: removing rport
Apr 10 12:07:54 backup kernel: [  453.461913] lpfc 0000:0c:00.1: 1:1303 
Link Up Event x5 received Data: x5 x0 x10 x0 x0 x0 0
Apr 10 12:07:54 backup kernel: [  453.464476] lpfc 0000:0c:00.1: 
1:(0):0207 Device 0 (20:01:00:0e:11:11:68:63) sent invalid service 
parameters.  Ignoring device.
Apr 10 12:09:02 backup kernel: [  521.051744] lpfc 0000:0c:00.0: 0:1303 
Link Up Event x5 received Data: x5 x0 x10 x0 x0 x0 0
Apr 10 12:09:02 backup kernel: [  521.054845] lpfc 0000:0c:00.0: 
0:(0):0207 Device 0 (20:07:00:0e:11:11:68:63) sent invalid service 
parameters.  Ignoring device.

Sera alguma incompatibilidade desse cabo que usava no servidor antigo 
com a placa nova?

Ja ouvi falar que existem varios tipos de cabos HBA.






Em 2014-04-10 14:49, Douglas Fischer escreveu:
> Tá em DAS ou em Switch?
> Tá na vSAN certa?
> 
> 
> Em 10 de abril de 2014 11:07, <juliano at cdznet.com.br> escreveu:
> 
>> Ele só identifica minha controladora raid
>> 
>> root at backup:~# sg_map -a -i
>> /dev/sg0  /dev/sda  IBM  ServeRAID M1115  2.13
>> root at backup:~#
>> 
>> 
>> Mais alguma ideia?
>> 
>> 
>> Em 2014-04-09 18:31, danillo F. escreveu:
>> 
>>  Tenta rodar o sg_map:
>>> sg_map -a -i
>>> 
>>> []'s
>>> Danillo
>>> 
>>>> Date: Wed, 9 Apr 2014 17:22:01 -0300
>>>> From: juliano at cdznet.com.br
>>>> To: gter at eng.registro.br
>>>> Subject: [GTER] placa HBA
>>>> 
>>>> Ola,
>>>> 
>>>> To com um problema com uma placa hba para ligar meu servidor a um 
>>>> TL4000
>>>> 
>>>> Segue modelo da placa
>>>> 
>>>> 
>>>> lspci
>>>> 
>>>> 0c:00.0 Fibre Channel: Emulex Corporation Zephyr-X LightPulse Fibre
>>>> Channel Host Adapter (rev 02)
>>>> 0c:00.1 Fibre Channel: Emulex Corporation Zephyr-X LightPulse Fibre
>>>> Channel Host Adapter (rev 02)
>>>> 
>>>> 
>>>> Dou um
>>>> 
>>>> root at backup:~# modinfo lpfc | grep filename
>>>> filename:
>>>> /lib/modules/2.6.32-5-amd64/kernel/drivers/scsi/lpfc/lpfc.ko
>>>> 
>>>> Mostra o drive e o mesmo esta levantado.
>>>> 
>>>> 
>>>> Porem se dou um lsscsi -g não detecta meu robo.
>>>> 
>>>> 
>>>> Alguem tem alguma placa dessa funfando no Debian Squeeze ou em outra
>>>> distro?
>>>> --
>>>> gter list    https://eng.registro.br/mailman/listinfo/gter
>>>> 
>>> 
>>> --
>>> gter list    https://eng.registro.br/mailman/listinfo/gter
>>> 
>> --
>> gter list    https://eng.registro.br/mailman/listinfo/gter
>>