[GTER] Aggregation + vlan + switch edge-core

[Joel Cappellesso]

Alguém já teve dificuldade parecida:

Nós temos 2 switchs ECS4610-26T interligados pela porta 25 (10Gbps)
Temos um Juniper MX80 com Aggregation configurado e conectado nas
portas 13 e 14 do switch1. O aggregation está funcional.
Conectamos um mikrotik em outra porta com a vlan23 e o mesmo responde.
Adicionei no switch1 a vlan23 com ip e ele também responde.
O problema ocorre ao tentar pingar o switch2 com a mesma vlan23. Via
aggregation ele não responde. Se eu desativar o aggregation no Juniper
funciona.
Do mikrotik conectato no switch1  ou mesmo do próprio switch1 o icmp
funciona para o ip da vlan23(switch2).

DÚVIDA: Já utilizamos o mesmo aggregation com outros switchs e o mesmo
nunca apresentou qualquer dificuldade. NO caso do equipamento da EDGE
CORE existe alguma limitação?

SEguem maiores informações da configuração:

Switch1:----------------------------------

interface ethernet 1/13
 switchport allowed vlan add 1 untagged
 switchport mode trunk
 switchport allowed vlan add 1,23,465-467 tagged
 queue weight 1 2 4 6 8 10 12 14
 vlan-trunking
 lacp
 lacp actor admin-key 1
 no ip igmp query-drop
 no ip multicast-data-drop
!
interface ethernet 1/14
 switchport allowed vlan add 1 untagged
 switchport mode trunk
 switchport allowed vlan add 1,23,465-467 tagged
 queue weight 1 2 4 6 8 10 12 14
 vlan-trunking
 lacp
 lacp actor admin-key 1
 no ip igmp query-drop
 no ip multicast-data-drop
!
!
interface ethernet 1/25
 no negotiation
 switchport mode trunk
 switchport allowed vlan add 23,465-467 tagged
 queue weight 1 2 4 6 8 10 12 14
 vlan-trunking
 lacp actor admin-key 0
!
!
interface vlan 1
 ip address 192.168.149.149 255.255.255.248
!
interface vlan 23
 ip address 192.168.79.2 255.255.255.248
!


switch2 ------------------------------------------------


!
interface ethernet 1/25
 no negotiation
 switchport allowed vlan add 23,465-466 tagged
 queue weight 1 2 4 6 8 10 12 14
 vlan-trunking
!
interface vlan 1
 ip address 192.168.149.150 255.255.255.248
!
interface vlan 23
 ip address 192.168.79.4 255.255.255.248
!
ip route 0.0.0.0 0.0.0.0 192.168.149.145

-------------------------

 CLI session with the ECS4610-50T/ECS4610-26T is opened.
      To end the CLI session, enter [Exit].

Vty-0#show version
Unit 1
 Serial Number          : EC1108000058
 Hardware Version       : R02
 EPLD Version           : 1.06
 Number of Ports        : 26
 Main Power Status      : Up
 Redundant Power Status : Not present
 Role                   : Master
 Loader Version         : 1.3.2.1
 Linux Kernel Version   : 2.6.19.2-0.1
 Boot ROM Version       : 0.0.0.1
 Operation Code Version : 1.2.2.0


---

Juniper:

set interfaces ae3 vlan-tagging
set interfaces ae3 aggregated-ether-options minimum-links 1
set interfaces ae3 aggregated-ether-options link-speed 1g
set interfaces ae3 aggregated-ether-options lacp active
set interfaces ae3 unit 23 description teste2
set interfaces ae3 unit 23 vlan-id 23
set interfaces ae3 unit 23 family inet address 192.168.79.1/29


Obrigado,

Joel Cappellesso