[GTER] Ativar BGP Embratel

[Andre Gustavo de C. Albuquerque]

Oi Ricardo, conseguiu rodar o tcpdump?

Pelo log abaixo parece que vc não está recebendo mensagens do roteador da
EBT (não recebeu nenhuma mensagem open do outro roteador).

Isso pode indicar ASN mismatch, configuração errada de IP, aplicação de
alguma ACL... Como a interface é diretamente conectada, não deve ser
problema de rota.

Abs, Gustavo

2009/12/2 Ricardo oliveira <ricardo.btu at gmail.com>

> Bom dia Pessoal da lista, hoje de madrugada realizei varios testes e nada
> da
> sessão BGP fechar, segue logs e um summary do Neighbor.
>
> Logs do debug do BGP.
> 200.230.125.145 [FSM] Timer (start timer expire).
> 200.230.125.145 [FSM] BGP_Start (Idle->Connect)
> 200.230.125.145 [Event] Connect start to 200.230.125.145 fd 12
> 200.230.125.145 [FSM] Non blocking connect waiting result
> 200.230.125.145 [FSM] TCP_connection_open (Connect->OpenSent)
> 200.230.125.145 [FSM] Receive_NOTIFICATION_message (OpenSent->Idle)
> 200.230.125.145 [FSM] Timer (start timer expire).
> 200.230.125.145 [FSM] BGP_Start (Idle->Connect)
> 200.230.125.145 [Event] Connect start to 200.230.125.145 fd 12
> 200.230.125.145 [FSM] Non blocking connect waiting result
> 200.230.125.145 [FSM] TCP_connection_open (Connect->OpenSent)
> 200.230.125.145 [FSM] Receive_NOTIFICATION_message (OpenSent->Idle)
>
> Summary do Neighbor
> BGP neighbor is 200.230.125.145, remote AS 4230, local AS 262659, external
> link
>  BGP version 4, remote router ID 0.0.0.0
>  BGP state = Idle
>  Last read 00:28:54, hold time is 180, keepalive interval is 60 seconds
>  Message statistics:
>    Inq depth is 0
>    Outq depth is 0
>                         Sent       Rcvd
>    Opens:                 26          0
>    Notifications:          0         26
>    Updates:                0          0
>    Keepalives:             0          0
>    Route Refresh:          0          0
>    Capability:             0          0
>    Total:                 26         26
>  Minimum time between advertisement runs is 30 seconds
>
>  For address family: IPv4 Unicast
>  Community attribute sent to this neighbor(both)
>  0 accepted prefixes
>
>  Connections established 0; dropped 0
>  Last reset never
> Local host: 200.230.125.146, Local port: 42643
> Foreign host: 200.230.125.145, Foreign port: 179
> Nexthop: 200.230.125.146
> Nexthop global: fe80::215:17ff:fe94:b538
> Nexthop local: ::
> BGP connection: non shared network
> Next start timer due in 38 seconds
> Read thread: off  Write thread: off
>
> Já nao sei oque fazer mais, já estou sem ideias, conto com a ajuda de
> vocês.
>