[GTER] PPP Multilink em CISCO 7206

[Alexandre J. Correa - Onda Internet]

o MPPP foi adicionado ao IOS na versao 11 ...

de uma olhada aqui

http://www.cisco.com/warp/public/131/mppp-ddr.html

ja tentou fazer "load-sharing per-packet" no lugar do ppp ? meus links 
da embratel sao feitos assim...



Mauro Cleffs Figueiredo wrote:
> Boa noite.
>
> Preciso colocar 2 links da EMBRATEL em Multilink.
>
> O roteador utilizado eh um CISCO 7206, com versao abaixo:
>
> ------------------------------------------------------------------------------
>
> cisco7206#sh version
> Cisco Internetwork Operating System Software
> IOS (tm) 7200 Software (C7200-IS-M), Version 12.0(28c), RELEASE SOFTWARE (fc1)
> Copyright (c) 1986-2005 by cisco Systems, Inc.
> Compiled Wed 30-Mar-05 15:10 by pwade
> Image text-base: 0x60008900, data-base: 0x60D60000
>
> ROM: System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE SOFTWARE (fc1)
> BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 11.1(17)CA, EARLY 
> DEPLOYMENT RELEASE SOFTWARE (fc1)
>
> cisco7206 uptime is 18 hours, 34 minutes
> System restarted by power-on
> System image file is "slot0:c7200-is-mz.120-28c.bin"
>
> cisco 7206 (NPE150) processor with 57344K/8192K bytes of memory.
> R4700 processor, Implementation 33, Revision 1.0 (512KB Level 2 Cache)
> Last reset from power-on
> Bridging software.
> X.25 software, Version 3.0.0.
> 2 FastEthernet/IEEE 802.3 interface(s)
> 8 Serial network interface(s)
> 125K bytes of non-volatile configuration memory.
> 1024K bytes of packet SRAM memory.
>
> 8192K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
> 4096K bytes of Flash internal SIMM (Sector size 256K).
> Configuration register is 0x2102
>
> ------------------------------------------------------------------------------
>
> Os comando utilizados sao:
>
> ------------------------------------------------------------------------------
>
> interface serial2/0
>   bandwidth 2048
>   no ip address
>   encapsulation ppp
>   no fair-queue
>   ppp multilink
>   ppp multilink group 1
> !
> !
> interface serial2/0
>   bandwidth 2048
>   no ip address
>   encapsulation ppp
>   no fair-queue
>   ppp multilink
>   ppp multilink group 1
> !
> !
> interface Multilink 1
>   bandwidth 4096
>   ip adreess ***** mask ******
>   ppp multilink
>   ppp multilink fragment delay 10
>   ppp multilink interleave
>   ppp multilink group 1
>   max-reserved-bandwidth  97
>
> ------------------------------------------------------------------------------
>
> O problema eh que: quando tento utilizar o comando:
>
> ppp multilink group 1
>
> dah erro. Soh aceita: ppp multilink
>
> Serah que a versao do IOS nao suporte Multilink? Ou estou fazendo
> algo errado?
>
> Em tempo: so estou configurando o meu lado. A EBT ainda nao ativou
> Multilink do lado deles...
>
> Desde jah agradeco!
>
>
>
>
> --
> []'s, Mauro Cleffs Figueiredo
> Interline Provedora de Internet Ltda
> http://www.interline.net.br
> (49) 3444-2530 ~ (49) 9994-4335 
>
> --
> gter list    https://eng.registro.br/mailman/listinfo/gter
>
>