[GTER] PPP Multilink em CISCO 7206

Mauro Cleffs Figueiredo mcleffs at concordia.psi.br
Wed Jan 16 00:16:22 -02 2008


Boa noite.

Preciso colocar 2 links da EMBRATEL em Multilink.

O roteador utilizado eh um CISCO 7206, com versao abaixo:

------------------------------------------------------------------------------

cisco7206#sh version
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.0(28c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 30-Mar-05 15:10 by pwade
Image text-base: 0x60008900, data-base: 0x60D60000

ROM: System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE SOFTWARE (fc1)
BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 11.1(17)CA, EARLY 
DEPLOYMENT RELEASE SOFTWARE (fc1)

cisco7206 uptime is 18 hours, 34 minutes
System restarted by power-on
System image file is "slot0:c7200-is-mz.120-28c.bin"

cisco 7206 (NPE150) processor with 57344K/8192K bytes of memory.
R4700 processor, Implementation 33, Revision 1.0 (512KB Level 2 Cache)
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
8 Serial network interface(s)
125K bytes of non-volatile configuration memory.
1024K bytes of packet SRAM memory.

8192K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102

------------------------------------------------------------------------------

Os comando utilizados sao:

------------------------------------------------------------------------------

interface serial2/0
  bandwidth 2048
  no ip address
  encapsulation ppp
  no fair-queue
  ppp multilink
  ppp multilink group 1
!
!
interface serial2/0
  bandwidth 2048
  no ip address
  encapsulation ppp
  no fair-queue
  ppp multilink
  ppp multilink group 1
!
!
interface Multilink 1
  bandwidth 4096
  ip adreess ***** mask ******
  ppp multilink
  ppp multilink fragment delay 10
  ppp multilink interleave
  ppp multilink group 1
  max-reserved-bandwidth  97

------------------------------------------------------------------------------

O problema eh que: quando tento utilizar o comando:

ppp multilink group 1

dah erro. Soh aceita: ppp multilink

Serah que a versao do IOS nao suporte Multilink? Ou estou fazendo
algo errado?

Em tempo: so estou configurando o meu lado. A EBT ainda nao ativou
Multilink do lado deles...

Desde jah agradeco!




--
[]'s, Mauro Cleffs Figueiredo
Interline Provedora de Internet Ltda
http://www.interline.net.br
(49) 3444-2530 ~ (49) 9994-4335 




More information about the gter mailing list