[GTER] Switch CISCO Catalyst 2900 series XL.

[Gilberto Villani Brito]

Olá;
Tenho um switch CISCO (Catalyst 2900 series XL) que estou configurando 2 vlans.
Configurei tudo corretamente, cada porta com a sua vlan
correspondente, mas somente uma vlan fica UP, a outra fica
administrativamente DOWN.
Abaixo vai exemplos de comandos:
Switch#configure terminal
Switch(config)#interface vlan 2
Switch(config-subif)#management
Switch(config-subif)#exit
Switch(config)#exit
Switch#show interfaces
VLAN1 is up, line protocol is down
  Hardware is CPU Interface, address is 0002.fd41.84c0 (bia 0002.fd41.84c0)
  MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
--- corta ---
VLAN2 is up, line protocol is up
  Hardware is CPU Interface, address is 0002.fd41.84c0 (bia 0002.fd41.84c0)
  Internet address is 10.0.0.100/24
  MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
--- corta ---
VLAN3 is administratively down, line protocol is down
  Hardware is CPU Interface, address is 0002.fd41.84c0 (bia 0002.fd41.84c0)
  Internet address is 10.0.1.100/24
  MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
--- corta ---

Mesmo usando o comando no shutdown na vlan 3 ele não sobe, mas se eu
executar o comando management na vlan 3 ele sobe e desce a vlan 2.
Gostaria de saber como falar para as 2 vlans ficarem erguidas.

Abraços
-- 
Gilberto Villani Brito
System Administrator
Londrina - PR
Brazil
gilbertovb(a)gmail.com