[GTER] Dúvidas com roteador Cisco

[Jeronimo Zucco]

Confundi com a interface serial, aih sim seria esse o procedimento.

Está com problema sim. Verifique o cabeamento e o switch/hub onde esse 
roteador está conectado.

-- 
Jeronimo Zucco
LPIC-1 Linux Professional Institute Certified
Núcleo de Processamento de Dados
Universidade de Caxias do Sul

http://jczucco.blogspot.com


Fabricio Veiga wrote:
> Boa tarde, senhores.
> 
> Bom, estive olhando algumas estatísticas do meu roteador. Usei o comando
> show interface e apareceu algumas informações que eu estou com dúvidas.
> 
> Ethernet0/0 is up, line protocol is up
>   Hardware is AmdP2, address is 0030.859d.abe0 (bia 0030.859d.abe0)
>   Internet address is 200.247.170.1/26
>   MTU 1500 bytes, BW 10000000 Kbit, DLY 1000 usec,
>      reliability 255/255, txload 1/255, rxload 1/255
>   Encapsulation ARPA, loopback not set
>   Keepalive set (10 sec)
>   ARP type: ARPA, ARP Timeout 04:00:00
>   Last input 00:00:00, output 00:00:00, output hang never
>   Last clearing of "show interface" counters never
>   Queueing strategy: fifo
>   Output queue 0/40, 270646 drops; input queue 3/75, 0 drops
>   5 minute input rate 2626000 bits/sec, 933 packets/sec
>   5 minute output rate 5386000 bits/sec, 962 packets/sec
>      823115879 packets input, 1651321925 bytes, 0 no buffer
>      Received 53670 broadcasts, 0 runts, 0 giants, 0 throttles
>      *578040 input errors, 291 CRC, 272 frame, 0 overrun, 577749 ignored*
>      0 input packets with dribble condition detected
>      814014840 packets output, 4124745671 bytes, 0 underruns
>      *74 output errors, 266213835 collisions, 1 interface resets <<<<*
>      0 babbles, 0 late collision, 46382497 deferred
>      0 lost carrier, 0 no carrier
>      0 output buffer failures, 0 output buffers swapped out.
> 
> Isso é normal ? Eu verifique as seriais e está com output e collisions
> zerados.
> Qual o procedimento a ser tomado ?
> 
> Obrigado.
> 
> 
> Fabrício Veiga
> --
> gter list    https://eng.registro.br/mailman/listinfo/gter