[GTER] Dúvidas com roteador Cisco

[Fabricio Veiga]

Boa tarde, senhores.

Bom, estive olhando algumas estatísticas do meu roteador. Usei o comando
show interface e apareceu algumas informações que eu estou com dúvidas.

Ethernet0/0 is up, line protocol is up
  Hardware is AmdP2, address is 0030.859d.abe0 (bia 0030.859d.abe0)
  Internet address is 200.247.170.1/26
  MTU 1500 bytes, BW 10000000 Kbit, DLY 1000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:00, output 00:00:00, output hang never
  Last clearing of "show interface" counters never
  Queueing strategy: fifo
  Output queue 0/40, 270646 drops; input queue 3/75, 0 drops
  5 minute input rate 2626000 bits/sec, 933 packets/sec
  5 minute output rate 5386000 bits/sec, 962 packets/sec
     823115879 packets input, 1651321925 bytes, 0 no buffer
     Received 53670 broadcasts, 0 runts, 0 giants, 0 throttles
     *578040 input errors, 291 CRC, 272 frame, 0 overrun, 577749 ignored*
     0 input packets with dribble condition detected
     814014840 packets output, 4124745671 bytes, 0 underruns
     *74 output errors, 266213835 collisions, 1 interface resets <<<<*
     0 babbles, 0 late collision, 46382497 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out.

Isso é normal ? Eu verifique as seriais e está com output e collisions
zerados.
Qual o procedimento a ser tomado ?

Obrigado.


Fabrício Veiga